发布于

THICKENT W—HPMC

Organo clay

Product introduction:

THICKENT W series is a special organic modified clay . It can be dispersed both in aqueous system and solvent system. Especially, It has excellent behavior in water-borne system. It can replace cellulose such as HEC and HPMC in water-borne coatings, construction mortar,ceramics.

Typical properties:

*Excellent water retention (Superior water retention to HEC and HPMC).

*Wide viscosity range (Cover all viscosity range of cellulose).

*Fine temperature tolerance. It can disperse in cold water or in hot water.

*High adhesion and strengthening, it can be used as adhesive agent in printing and dyeing in textile industry.

*High thixotropy

*THICKENT W has good coordination with cellulose, it can be used together with HEC or HPMC. Normally, the ratio of THICKENT W3 and cellulose is 80%:20%.

Specification:

Item Index Type Concentration(%) Viscosity(mPa.s25℃),RV7-60r/min
Appearance White powder  

 

 

THICKENT W3

 2% 1500~2500
Particle size, 200mesh ≥95%
Moisture content ≤12%
Bulk density,kg/m3 430
PH(solution) 8.0~10.0

Note: Viscosity testing condition: water solution at 25℃,tested by Brookfield DV-Ⅱ VISCOMETER, Rotor Rotate speed RV7

Application:

  1. Cement-based mortar
  • THICKENT W3 has good thickening performance in mortar and can improve mortar’s rheology. With THICKENT W3, mortar is more slippy and easier for workers to coat on wall. It can Prolong construction time of mortar, and create higher working efficiency. It is helpful for mortar to form high intension during solidification.
  1. Putty
  • THICKENT W3 has good water-retention performance in putty, and it can prevent putty to be dewatering and crack, and prolong construction time. THICKENT W3 has anti-skinning performance and is helpful for putty to have high intension during solidification.
  1. Thermal insulation mortar (mainly for Bonding mortar and overlay mortar)
  • With its high water-retention thixotropy and adhesion, THICKENT W3 can prolong construction time of mortar and create higher working efficiency. It gives fine surface and slippery feeling of the mortar and improve surface quality by its shrinkability and anticracking. It is helpful for mortar to form high intension during solidification. and improve bond strength.

Interface treatment binder

  • THICKENT W3 is good thickening agent for interface treatment binder. It can increase tensile strength and anti-shear strength, and make the binder to have better adhesion and binding strength.
  1. Ceramic tile

◆ THICKENT W3 can be used in ceramic tile as water retention agent,adhesive. With its perfect water retention and adhesion, ceramic tile can be strength enough to avoid crack and easier to be constructed.

  1. Emusion coatings and other water-borne paint.
  • With its high thickening and thixotropy, it can be used to replace HEC in Emusion coatings and other water-borne paint as rheological additive, film-forming agent, adhesive, emulsifierand stabilizer. It also can be used together with HEC in a proper ratio.
  1. Printing and dyeing in textile.
  • Used as adhesive

Package and Storage:

◆ Package: Craft paper bag with PE liner.  The weight of each package is 20kg or 25kg.

◆ Store condition: Keep it in Dry and sealed. places at the TEMP. of 0℃-30℃.

◆ Validity:12months from the date of manufacturing.