Organophilic bentonite clay for oil based drilling fluids

Organophilic bentonite clay for oil based drilling fluids :

In order to improve the safety of drilling and slurry rate, we will choose organic bentonite applied to oil-based drilling fluid, which not only affects the physical properties of the drilling fluid, but also maximizes the cost control of the drilling process, and the well wall and cause good stability.

Its impact on the environment is very small.

It can be said that organic bentonite is an indispensable additive in drilling fluids, originating from its high temperature stability, high pressure stability, as well as the ability to carry rock cuttings and clean the borehole, and control the emulsion stability.

Organic bentonite used in oilfield drilling mud, we mainly divided into wet preparation and dry preparation, and the wet preparation has better stability.

We can get good organic bentonite by adding organic modifiers, mixing by stirring and then filtering, drying and grinding after sufficient mixing.

Organophilic bentonite clay for oil based drilling fluids

This organic bentonite can increase the yield point and gel strength of the mud. It reduces its water loss during drilling, ensures emulsion stabilization and prevents delamination.

Especially at temperatures between 180 degrees Celsius and 200 degrees Celsius, the organobentonite always maintains good high temperature stability.

Currently used for oilfield drilling, we mainly recommend cp2cp992 and cp250a, which can be used for diesel systems, mineral oil systems, and synthetic applications, respectively.

The differences in these base oils make us recommend these models to you with targeted recommendations.

We sincerely welcome you to consult us about organic bentonite. We are willing to provide free samples and product specifications to help you successfully complete your procurement project.

Looking forward to your inquiry.

We suggest that you obtain the best signal through experiments.

 Product information

CP-N2 Organophilic Clay is a wet process improved viscosifier and gelling agent. It is an easy dispersing, rapid yielding organoclay that exhibits high performance efficiency in diesel oil, crude oil, Low BTEX base oil, mineral oil and synthetic containing base fluid formulation. It is stable and has good suspension and thixotropic features.  The temperature range is between 180~220 ℃.

Properties

Composition                      Organically modified bentonite clay

                 Appearance                       Off white to tan finely divided powder,

                 Moisture content (105℃,2hr)         ≤5

                 Particle size (<76μm or 200mesh)    ≥98%

                 Specific Gravity                  1.5-1.7

Advantages

• Disperses easily in less time with less shear
• High performance viscosifier for low aromatic, all mineral oil and synthetic base fluids
• Cost- effectively builds viscosity and yield point
• Aids control of fluid loss to the formation
• Increases emulsion stability
• Suspends weighting  materials and other solids
• Confers stability at the pressure and temperature 10⁸Pa and 230℃

Application

                     Base oil:

• Diesel Oils
• Crude Oils
• Mineral Oils
• Synthetic Oil
• Alpha Olefins
• Low BTEX base oil

Viscosifying drilling Fluids:

• Oil based drilling fluids
• Invert emulsion fluids
• Workover fluidsl
• Completion fluids
• Casing packs
• Packer fluids

2.检查数据QC Specification/ Performance Specification