CHINACOAT 2026 Booth 1.2F37: Organoclay for Every Coating System
# Organoclay for Solventborne and Waterborne Coatings: Camp-Shinning at CHINACOAT 2026
Choosing a clay-based rheology additive starts with the coating system. Solventborne formulations need an organoclay that matches the solvent polarity, while waterborne coatings need a clay that disperses and develops structure in water.
At CHINACOAT 2026, Zhejiang Camp-Shinning New Material Co., Ltd. will present both product ranges for coating formulators. Visit **Hall 1.2, Booth 1.2F37**, from **11 to 13 November 2026** in Guangzhou to discuss grade selection, dispersion and performance in your formulation.
## How Bentonite Rheology Additives Work in Different Coating Systems
Organoclay, also known as organic bentonite or organophilic bentonite, is produced by modifying bentonite with quaternary ammonium compounds. This modification makes the clay compatible with non-aqueous systems.
CHINACOAT 2026 Booth 1.2F37: Organoclay for Every Coating System
In solventborne coatings, solvent polarity affects how well the organoclay disperses and develops its gel structure. Grades that require activation use a polar activator, typically at 3โ5% of the pre-gel. Selecting the right grade matters: additional mixing cannot make up for poor compatibility with the solvent system.
Waterborne coatings use hydrophilic montmorillonite, which swells directly in water and forms a three-dimensional network. This structure helps suspend pigments and control sag without a polar activator or a separate pre-gel step.
The two systems therefore need different clay grades, even when the formulation goalsโpigment suspension, sag control and viscosity stabilityโare similar.
## Organoclay for Solventborne Coatings
Solventborne alkyd, acrylic, epoxy, polyurethane and chlorinated rubber coatings need a balance between flow during application and structure after application. In marine anti-corrosion coatings, automotive refinish and high-build industrial coatings, organophilic bentonite helps control sag and keep pigments suspended.
Camp-Shinning will present the following grades:
– **CP-10 / CP-180:** For low-polarity aliphatic and mineral spirit systems, with easy-dispersing options for direct powder addition to the mill.
– **CP-20:** For low- to medium-polarity carriers, including medium- and long-oil alkyd and acrylic systems.
– **CP-27 / CP-27A:** For medium- to high-polarity solvent systems.
– **CP-MPZ:** Covers non-polar through highly polar systems, including production lines that use several solvent blends.
– **CP-EZ / CP-APA:** Easy-dispersing organoclay grades that do not require a separate pre-gel tank.
Discussions at the booth can focus on practical formulation questions: sag resistance at a 200 ยตm wet film thickness, suspension of aluminium flake or heavy iron oxide after four weeks, and viscosity recovery after high-shear let-down.
## Bentonite Rheology Additives for Waterborne Coatings
For waterborne coatings, emulsion paints and water-reducible industrial systems, clay selection depends on dispersion, pH tolerance and the structure needed to limit pigment settling during storage.
The water-based range includes:
– **CP-EW:** For emulsion paints and general waterborne formulations.
– **CP-EWS:** Offers finer thixotropy, better transparency and easier dispersion than CP-EW, particularly relevant to gloss and clear systems.
– **CP-WBS / CP-EWB:** Refined and beneficiated bentonite grades for aqueous formulations, including putty, sealants and pigment slurries.
The addition sequence is important. Start with water at pH 7.0โ8.0, add the clay slowly under high-speed shear, and disperse for 20โ30 minutes. Add the remaining additives, pigments, latex and let-down components afterward.
An incorrect sequence can produce a batch with a high viscosity reading but insufficient structure during application. These water-based grades require no polar activator and can replace part of an HEC or CMC thickener package to help reduce formulation cost.
## Formulation Testing at Booth 1.2F37
Visitors can discuss grade selection and assess clay performance through the following checks:
1. **Dispersion in your own system**
Bring a litre of your solvent blend, resin or let-down so the team can assess the grade in the carrier you use.
2. **Sag resistance and anti-settling performance**
Compare vertical draw-down results and accelerated storage performance with your current additive.
3. **Viscosity at different shear rates**
Check low-shear structure and flow under high shear.
4. **Transparency and fineness**
Assess suitability for clear coats, gloss enamels and high-gloss decorative coatings.
5. **Addition level**
For direct powder addition in solventborne coatings, the usual working range is 0.2โ2% of total formulation weight. The appropriate level depends on the formulation.
## About Camp-Shinning
Camp-Shinning has worked with bentonite since 2000. The company sources from its own ore and has an annual organoclay production capacity of 20,000 tonnes, supporting raw material control and batch consistency.
Production is ISO 9001 certified. The company also holds a national patent for a modified organic bentonite and its preparation method.
Export packaging is available in 25 kg bags and 600 kg big bags. Container loading is 15 MT per 20-foot FCL and 25.2 MT per 40-foot FCL. Delivery is 7โ10 days after deposit, and the stated shelf life is 24 months.
## Exhibition Details
| Item | Detail |
|—|—|
| Exhibition | CHINACOAT 2026 โ 30th anniversary edition |
| Dates | 11โ13 November 2026, WednesdayโFriday |
| Venue | Area A, China Import and Export Fair Complex, Guangzhou |
| Booth | Hall 1.2, Booth 1.2F37 |
| Exhibition scale | More than 1,280 exhibitors from 28 countries and regions confirmed as of 18 September |
## Frequently Asked Questions
### Can the same organoclay be used in solventborne and waterborne coatings?
No. Solventborne organoclay is organically modified for non-aqueous carriers and must match the solvent polarity. Waterborne bentonite grades swell in water and require no polar activator. Using a grade in the wrong system can result in poor gel development or an unstable structure.
### Which organophilic bentonite grades suit epoxy, polyurethane or high-polarity solvent systems?
CP-27 and CP-27A are options for medium- to high-polarity systems. CP-MPZ covers a broader range of solvent blends. Where resin wetting is poor, including in some epoxy, polyester and short-oil alkyd systems, a surfactant may be needed alongside the clay to develop the full structure.
### Do water-based bentonite grades need a polar activator?
No. Disperse the clay in water at pH 7.0โ8.0 under high shear for 20โ30 minutes. A polar activator is unnecessary in these aqueous systems and may disturb the gel structure.
### How can I arrange a technical meeting or request samples before the exhibition?
Email **[email protected]** or message **+86-13185071071** with your resin system, solvent or water base, and target film thickness. The team can prepare suitable samples and arrange a meeting at Booth 1.2F37.
## Meet Camp-Shinning at CHINACOAT 2026
Bring your formulation detailsโor a sample of your carrierโfor a 30-minute trial and a discussion about sag control, pigment settling and viscosity stability.
**11โ13 November 2026 ยท Guangzhou ยท Hall 1.2 ยท Booth 1.2F37**
*Zhejiang Camp-Shinning New Material Co., Ltd. โ manufacturer of organophilic bentonite and organoclay rheology additives for coatings, inks, greases, adhesives and drilling fluids.*