en English

Application Of Emulsifier

Product Name : Application Of Emulsifier

Color :                Dark liquid

Application:        Application Of Emulsifier For Oil drilling Mud   

Materials :          Fatty Acid And Amine

Certificate:           ISO 9001

Packing:               180Kg/Drum Or Customize  

                             14MT/20FCL With Pallet 

Features :             Helps lower filtration rates

Sample Service :   Emulsifier Sample Available.

Brand :                    Camp Shinning Emulsifier

Application Of Emulsifier

Application of emulsifier is widely used for oil drilling fluids.

 

CPMUL-P serves as a primary emulsifier in oil-base mud systems. It is formulated to give good

emulsification, improved thermal stability of the invert emulsion, and enhanced high-temperature,

high-pressure (HTHP) filtration control. Through comprehensive tests in a number of oil-base mud

 

formulations with various base oils, mud densities, oil/water ratios and hot-rolling temperatures, it

proves that at working temperature up to 149oC (300oF), CPMUL-P can maintain high ES

(electrical stability), low HTHP filtrate and desired rheological property.

Through comprehensive tests in a number of oil-base mud

formulations with various base oils, mud densities, oil/water ratios and hot-rolling temperatures, it

proves that at working temperature up to 149oC (300oF), Primary emulsifier CPMUL-P can maintain high ES (electrical stability), low HTHP filtrate and desired rheological property.

Primary emulsifier CPMUL-P comprises of modified amidoamine, oxidized fatty acids and low-toxic organic solvent.

Sale Dept:    [email protected]

Cell(Whatsapp): +86-13185071071 

We are pleased to offer oil based emulsifier CPMUL-P with specification as below:

  1. Chemical composition of emulsifier

Appearance  

Dark Brown Liquid

Odor:

no or slight odor

Specific Gravity (20℃):

0.93~ 1.03

Flush Point (PMCC):

> 65oC (149oF)

Pour Point:

< -10oC (14oF)

Solubility:

soluble in oil. Insoluble in water.

  1.  Mud Performance Specification

Yield Point (YP):

10 – 20 lb/100ft2

Electrical Stability (ES):

minimum 500 Volt

HTHP Filtrate @ 121oC (250oF), 500psi:

maximum 12ml

CPMUL-P comprises of modified amidoamine, oxidized fatty acids and low-toxic organic solvent.

How To Use An Emulsifier


For test procedure of mud performance, please refer to ANNEX below.

ANNEX

Test Procedure of Mud Performance

  1.  Test Reagents

White oil 5#     low-aromatic-content mineral oil,

Organophilic clay CP-150 high-grade organoclay, made by Camp Shinning

Calcium hydroxide (lime)   analytical grade, from local market

CPmul-S   secondary emulsifier, made by Camp-Shinning

Barite     API grade, from local market

Rev Dust    evaluation clay, from the U.S. market

2.  Test Mud Formulation

 

      White oil 5# (base oil)

222ml

Organophilic clay CP-150

7g

Lime

5g

CPmul-P (to be tested)

6g

CPmul-S (Control Sample)

3g

25% CaCl2 water solution

60ml

API-grade barite

215g

Rev Dust

15g

Mud weight

11.80ppg

O/W ratio

80:20

  1.  Test Mud Preparation
  • 25% CaCl2preparation: Dissolve 25g anhydrous CaCl2 into 75ml distilled water. Store it for service.
  • Pour White oil5# into the mixing cup of Hamilton Beach Mixer. While stirring on the mixer at low rpm, add CPmul-P and CPmul-S, and wait until they are fully dissolved in the oil. Then at 11000rpm stirring strength, add 25% CaCl2 solution slowly into the oil. Then add other additives at the order of lime,Organophilic clay CP-150, Rev Dust and barite. When everything is added, continue to stir the mud at 11000rpm for 30 minutes.
  1.  Mud Performance Test
  • Warm the mud to 49oC (120oF). Test R600 (dial reading at 600rpm of Fann 35 VG Meter), R300, R200, R100, R6, R3, 10-seconds gel strength and 10-minutes gel strength. Calculate Yield Point

(YP):

YP= 2xR300 – R600 (lb/100ft2)

  • Hot roll the test mud in a hot roller at 121oC (250oF) for 16 hours. After hot rolling, cool the mud to 49oC (120oF), then test R600, R300, R200, R100, R6, R3, 10-seconds gel strength and 10-minutes gel strength. Calculate Yield Point (YP):

YP= 2xR300 – R600 (lb/100ft2)

  • Electric Stability (ES) is tested always at room temperature. ES is tested before and after hot rolling. Before testing ES, stir the mud at 6000rpm for 10 minutes on Hamilton Beach Mixer.
  • HTHP filtrate is tested after hot rolling. Test is at 121oC (250oF) and 500psi pressure differential. Collect the filtrate for 30 minutes.

RECOMMENDED DOSAGE

We recommend a dosage of 2-4% (v/v) for normal application upto 150 ᵒC. Lab formulation trials are suggested before field application.

HANDLING & SAFETY

Please refer Material Safety Data Sheet for safety and handling guidelines for

Application Of Emulsifier

//