How to make organoclay pre-gel: Pre-Dispersed Rheology Control for Coatings, Inks and Solvent-Based Systems

How to make organoclay pre-gel: Pre-Dispersed Rheology Control for Coatings, Inks and Solvent-Based Systems

A pre-gel is a pre-dispersed system prepared by activating our organic bentonite in a selected solvent together with a polar activator before the clay is introduced into the final coating, ink or grease formulation.

Pre-gelling opens up the bentonite layers ahead of production, so the organoclay builds its thixotropic structure quickly and consistently once the gel is added to the bulk binder, delivering reliable anti-settling, sag resistance and viscosity control with less high-shear mixing time on site.

How to make organoclay pre-gel:ย  Rheology Control Additive for Sag Resistance in Paints and Printing Inks

The preparation guide below covers our CP series grades: CP-10185 is dosed at 6โ€“10% on a dry powder basis and works in xylene (88โ€“92%) or No. 200 mineral spirits (86โ€“90%), activated with 3โ€“5% methanol/water (95:5) or 2โ€“4% ethanol/water (95:5).

How to make organoclay pre-gel | CP Series Organoclay Rheology Additive

CP-180 is used at 10% in xylene (86โ€“87%), or in a xylene/n-butanol (4:1) blend at 86โ€“87%, with 4% methanol/water (95:5) or 3% ethanol/water (95:5) as the polar activator.

For solvent systems where an activator is not preferred, CP-388 can be dispersed directly in xylene (90%) at a 10% dry powder dosage, with no polar activator required. Simply match the solvent polarity of your end product to the recommended pre-gel recipe, and adjust the activator level within the stated range to hit your target viscosity and thixotropy.