Organoclay for Adhesives and Bonding Agents
Organoclay Thickener is a modified bentonite for Adhesives & Bonding Formulations （Bonding Agents).
Organobentonite plays its most significant role in adhesive formulations by providing superior suspension properties, anti-sagging performance, thixotropy, and effective viscosity control.
Camp-Shinning’s organoclay bentonite is suitable for use in both solvent-based and water-based adhesives.
Camp-Shinning’s organic bentonite clay is suitable for a wide range of adhesives, including:
- Epoxy adhesives
- Polyurethane adhesives
- Acrylic adhesives
- Tile adhesives
- Stone adhesives
- Wall putty adhesives
- Waterproof bonding agents
- High-temperature sealants
- Conductive adhesives
- Medical adhesives
- Hot-melt adhesives
Organoclay for Adhesives and Bonding Agents
High-Performance Organoclay Thickener for Adhesives & Bonding Formulations
We will provide you with comprehensive, end-to-end services, from formulation adjustment to application, to ensure you achieve ideal thixotropic and rheological properties when using organobentonite in adhesives.
Organoclay for Adhesives:
- We will provide you with free sample testing.
- We can adjust your formulation.
- We offer you free guidance.
- We provide free samples.
We will respond quickly to any problems you encounter during testing and use.
Performance advantages of organic bentonite in adhesives and bonding agents:
Organoclay for Adhesives:
1) Efficient thickening and stabilization system, preventing separation and sedimentation.
2) Excellent thixotropic properties, enabling broad application scenarios.
3) Enhanced bonding strength and improved adhesion.
4) Achieves stability under high-temperature and high-pressure conditions, extending the service life of adhesive products.
CP-34 For Adhesives
CP- 34 is an organo clay (modified bentonite), designed especially for use in solvent based system. It can be used widely in solvents from low polarity to medium-high polarity.
CP-MPS For Bonding Agents
CP-MPS is a kind of organo clay rheological additive used in solvent and resin systems covering non polarity to high polarity range.
CP-250A For Binder
CP-250A is a kind of purified and modified organoclay rheological additive, designed especially for using in binder based on synthetic oils such as vegetable oil, polyester oil.
Method and steps for adding organic bentonite to solvent-based adhesives:
Pre-gel the organic bentonite. At this stage, add a polar activator to enhance dispersion. Options include 95% ethanol, methanol, or propylene carbonate.
Then add the organic clay under high-speed dispersion. The recommended dosage is typically around 2%.
For water-based adhesives, we recommend adding organic bentonite under high-shear conditions. No activator is required in this case, with a typical dosage of approximately 3%.
The specific dosage ultimately depends on your viscosity requirements.
Order Online
Please send your message to us
*We will reply your inquiry to this Email as soon as we see it