Bentonite Gelling Agent in Light Weight Cement Slurry CP-2
Bentonite Gelling Agent is as an organophilic clay, it is used for oil based fracture. Especially when your base oil is diesel, mineral oil, or synthetic oil, our rheological additives are particularly suitable for your formula. Organic bentonite clay exhibits unique thixotropy, rheological properties, and suspension properties.
Email: [email protected]
Bentonite Gelling Agent in Light Weight Cement Slurry CP-2
Bentonite Gelling Agent in Light Weight Cement Slurry CP-2 evaluation with accordance API 13A Spec. Viscometer dial reading at 600R/Min. 20 Yield point /plastic viscosity ration max 3 filtrate volume max 15cm3.
Residue of diameter greater than 75 micro/m max. Mass fraction 4%. To be packed in multi-wall with one-layer water-resistant bags.
Package: Bentonite Gelling Agent in 25kg (55LB) Bags.Each 40 bag in a big bag made from a kind of waterproof tarpaulin with a resistance handle).
Palletized on reinforced PVC pallets & shrink-covered.
Bentonite Gelling Agent CP-992 Organophilic Clay is a wet process improved viscosifier and gelling agent.
It is an easy dispersing, rapid yielding organoclay that exhibits high performance efficiency in diesel oil, crude oil, Low BTEX base oil, mineral oil and synthetic containing base fluid formulation.
Bentonite Gelling Agent is stable and has good suspension and thixotropic features. It can also be used in adhesives and sealant.
Properties
Composition Organically modified bentonite clay
Appearance Off white to tan finely divided powder,
Moisture content (105℃,2hr) ≤3.5%
Particle size (% Thru150Mesh:95min) ≥95%
LoI: 35-39%
Advantages
Application
Package
Kraft paper bag with PE liner or multi-wall paper sacks or customized. 25kg/bag or 22.68kg/bag or customized
Storage
CP-992 Store in a dry, well-ventilated area with temperature of 0℃-30℃. Keep container closed. The quality guarantee period is 24 months.
QC Specification/ Performance Specification
项目Index | 技术要求Specification | 检验结果Spec Notes |
外观Appearance | Gray or Tan powder | Gray powder |
水份Moisture content, (105℃,2hr),% | ≤4 | 3.5 |
粒度Particle size, % Thru 150 Mesh | ≥98 | 99 |
粘度(3%柴油), Viscosity(3% Diesel Oil 600 rpm) CP | ≥24 | 25 |
3.理化指标Typical Properties
比重Specific Gravity | 1.7 |
堆密度Bulk Density, KG/ M³ | 540 |
溶于水Soluility in Water | Insoluble |
溶于油Solubility in Oil | Dispersible |
气味Odor | Mild |
5.测试结果Test Result
测试结果Test Result: PASS | 检验人员 Inspector: |
Modified bentonite
Please send your message to us
*We will reply your inquiry to this Email as soon as we see it
