Organoclay grease Lubricating as thickening agent

Grease with our Rheological additive can produce high temperature resistance. it gives improved metal adhesion and bleed resistance. And It effects good working stability and water resistance to the greases. The basic oils lubricanting will determine which types of our organoclay should be selected.

• Organoclay CP-250Adesigned especially for using in Grease based on synthetic oils | Mineral oil | Medium,high viscosity lubricating oil.
• Organoclay CP-40designed especially for using in Grease based on Diesel Oils.
• Organobentonite CP-MP is designed especially for using in Grease based on  Mineral oil.  

Advantages

• High efficiency
• The gel is of light colour and high clarity
• Easy to use, no need to pregel
• Eliminate polar activator
• Consistent development of rheology
• Can be used to post correct

Using

When it is used in Grease Lubricant, polar activator is needed. Polar activator is acetone/water(95/5). The dosage of activator is 20%-30% of the weight of YN-052A. And also high shear can promote the dispersing of YN-052A.

Adding procedure as follows:

1. If condition permits, heat the base oil to 60~70℃
2. Add YN-052A while stirring, addition level is 7%-10% of the total formulation. Stir  5~10minutes
3. Add polar activator, addition level is 2%-3% of the total formulation. Then add other additives, stir 25~30m
4. Use pump to help it pass colloid grinding and homogenizer.
5. Deair, filtrate, pack.

Note: With High-speed dispersant of grinding machine, and properly prolong the dispersing time, better gelatin performance can be reached.

The Lubricanting grease which uses organoclay as thickener will own high dropping point, thus can be used under high temperature and presents good impermeability and water resistance.

If you are interesting our organoclay use for lubricanting lubricanting,pls mail us now.

[email protected]

+86-13185071071   (Cel /Whatsapp /Wechat)