Organophilic Clay Use Oil Drilling Mud 

Considering different geological conditions and depth of a oil drilling well, Oil drilling company may choose different oil for drilling fluid, such as diesel, mineral oil, synthetic oil and crude oil.

Organophilic Clay Use Oil Drilling Mud , Normally, our CP-169, CP-EZ and CP-982 are recommended for diesel, 

and CP 250A and CP992 can be applied  in not only diesel, but also in synthetic oil, mineral oil and crude oil.

* CP169 is a economical grade for diesel. Its performance can be enhanced when polar activator in moderation is added. So, especially it is recommended for water-in-oil drilling fluid because small dosage of water can act as polar activator.

*CP-EZ and CP-982 are self-activated grades and can be disperse without polar activator. They are recommended when diesel based drilling fluid contain no water or other external polar activator.

A small amount of water (0.1 0.2% by weight  of total formula) added to mud further speeds the gelation process and optimizes organoclay use

*CP-250A and CP 992 have better temperature stability and gelation efficiency in not only diesel, but also synthetic oil, mineral oil and crude oil. They effect rapid dispersibility and contribute initial viscosity,and require no external polar activator.   

CP- 250A has better YP value and temperature stability than CP-992.

Properties

Composition                                 Organically modified bentonite clay

Appearance                                  Off white to tan finely divided powder,

Moisture content (105℃,2hr)         ≤3.5%

Specific Gravity                            1.7

Bulk density                                  0.40~0.60g/cm³

Advantage：

• Effectively suspends weighting materials and other solids
• Maintains suspension over a wide temperature range
• Eliminates need for chemical activators
• Is easy to disperse and rapid yielding
• Suspends weighting materials and other solids
• Maintains suspension over a wide temperature range

  grades of organophilic clay in oil drilling fluids. 

 CP-250A  /  CP-982  /  CP-992 /CP-169 / CP-EZ / CP-150

 Organophilic clay is a wet process improved viscosifier and gelling additive.As an organoclay bentonite,it has good performance efficiency in diesel,mineral oil and synthetic Oil.

Emai:   [email protected]

Cel(Whatsapp):  86-13185071071