Zhejiang Camp – Shinning New Material Co.Ltd ,as the market leader in the powder coating additives world, offers a range of additives of organoclay rheological additive for powder coating. Those grades of organoclay help our customers to solve coating problems and to reach unique effects.
Powder Coating Additives Organoclay Thickener CP-34 is an organo clay modified bentonite clay, designed especially for use in solvent based system. It can be used widely in solvents from low polarity to medium-high polarity.
Properties
Composition Organic derivative of a montmorillonite clay
Appearance Fine powder, light yellow
Moisture content (105℃,2hr) ≤3.5%
Loss on ignition (1000℃) 28%-30%
Bulk density 0.53g/cm3
Fineness (<74μm, %) ≥98%
Advantages
High gelling efficiency
Light color gel
Produce reproducible thixotropic consistency over a wide temperature range
Imparts particle suspension, preventing hard settling of pigment and fillers.
Exerts strong film reinforcing action in organic binder systems.
Application
Powder Coating Additives Organoclay Thickener CP-34 is used in the following applications:
Marine paint, Industrial paint, heavy-duty, anticorrosion paint such as bituminous coatings, polyester paints, Alkyd paints.
Sealant
Inks
Grease
Unsaturated polyester putty
Using
Powder Coating Additives Organoclay Thickener CP-34 disperses under high shear and requires a polar activator for best efficiency. Heat is not required to obtain good dispersion. Addition levels are typically in 0.2%~2.0%. Polar activator (95% Ethanol or 95% Methanol) is needed. Normally addition level of polar activator is recommended to be 40%~50% of CP-34 in weight. If in xylene system, addition level of polar activator is about 30%-40% of CP-34 in weight.
Pre-gel is made as below procedure.
Charge solvent to mill
Slowly add CP-34(6-10% by weight of total pregel) to mill under agitation.
Mix at high speed for 5 minutes.
Add polar activator.
Mix at high speed for 5 minutes.
Safety
All safety information is provided in the Material Safety Data Sheets for Zhejiang Camp-Shinning New Material Co.,Ltd..
Package
Kraft paper bag with PE liner or multi-wall paper sacks or customized. 25kg/bag or 22.68kg/bag or customized
Storage
Powder Coating Additives Organoclay Thickener CP-34 has a shelf life of 2 years, and should be stored in ventilated cool and dry place.
Notice
The information on use is based on data which are believed reliable, but any recommendation or suggestion made is without guarantee or warranty, since the conditions of use are outside our control. All products are sold on the conditions that purchasers shall make their own tests to determine the suitability of such products for their purpose and that all risks are assumed by user. We disclaim any responsibility for damages resulting from careless or improper handling or use. Nothing herein is to be taken as permission, inducement or recommendation to practice any patented invention without a license.
Organically bentonite Clay Thickened Grease can produce high – temperature resistance. It affects good working stability and water resistance to the greases. And it gives improved metal adhesion and bleeds resistance. The basic oils grease will determine which types of bentonite organoclay should be selected.
Pls mail us if you have any question about Powder Coating Additives Organoclay Thickener
Organophilic, here we mean organophilic Clay or Organophilic Bentonite clay. Organophilic is organophilic montmorillonite | bentonite clay.
organophilic Clay HS code : 2508 10000
Organophilic Bentonite CAS NO.: 68153-34-4
Organophilic could use for oil drilling mud when the base oil is diesel oil, mineral oil, or Synthetic oil. It also could use for fracture fluids when the base oil is the same as above.
Inorganic Grease Thickeners Water Based Organoclay
Inorganic Grease Thickeners is a water Based Organoclay rheological additive. Inorganic Grease Thickeners organoclay is used for water based grease.In another words that the water based organoclay is used for Inorganic Grease as a thickeners.
Inorganic Grease Thickeners
Water-based organ oclay
Lubricating Grease Additives Organoclay CP-250A is a kind of purified and modified organoclay rheological additive, designed especially for use in Grease based on synthetic oils such as vegetable oil, polyester oil.
Lubricating Grease Additives Organoclay has high gelling efficiency, fine thixotropy and perfect anti-settling.
Properties
Composition Organic derivative of a montmorillonite clay
Grease Lubricant(the base oil is synthetic oil such as middle-high viscosity petroleum, mineral oil, diester oil, polyester oil, vegetable oil etc.)
Wood coating
Using
When it is used in Grease Lubricant, polar activator is needed. Polar activator is acetone/water(95/5). The dosage of activator is 20%-30% of the weight of Inorganic Thickeners Organoclay CP-250A. And also high shear can promote the dispersing of CP-250A.
Adding procedure as follows:
If condition permits, heat the base oil to 60~70℃
Add Lubricating Grease Additives Organoclay CP-250A while stirring, addition level is 7%-10% of the total formulation. Stir 5~10minutes
Add polar activator, addition level is 2%-3% of the total formulation. Then add other additives, stir 25~30m
Use pump to help it pass colloid grinding and homogenizer.
Deair, filtrate, pack.
Note: With High-speed dispersant of grinding machine, and properly prolong the dispersing time, better gelatin performance can be reached.
The Lubricanting grease which uses organoclay as thickener will own high dropping point, thus can be used under high temperature and presents good impermeability and water resistance.
Safety
All safety information is provided in the Material Safety Data Sheets for Zhejiang Camp-Shinning New Material Co.,Ltd..
Package
Kraft paper bag with PE liner or multi-wall paper sacks or customized. 25kg/bag or 22.68kg/bag or customized
Storage
Lubricating Grease Additives Organoclay CP-250A has a shelf life of 2 years, and should be stored in ventilated cool and dry place.
Notice
The information on use is based on invention data which are believed reliable, but any recommendation or suggestion made are without guarantee or warranty, since the conditions of use are outside our control. All products are sold on the conditions that purchasers shall make their own tests to determine the suitability of such products for their purpose and that all risks are assumed by user.
Any question about Inorganic Grease Thickeners organoclay, you can mail us: [email protected]
Cell (whatsapp) : +86-13185071071
Keywords: Organoclay Cost Organoclay Price Organoclay uses Organoclay applications Water Based Organoclay
Rheological Agent Organoclay For Paints, Grease Oil field
Rheological Agent Organoclay CP-180 is an amine treated bentonite clay, organo clay (modified montmorillonite), designed especially for use in solvent-based system including intermediate and low polarity range organic Inks, organic grease, and oil field.
Properties
Composition Organic derivative of a montmorillonite clay
Appearance Fine powder, white
Moisture content (105℃,2hr) ≤3.5%
Loss on ignition (1000℃) 29%-32%
Bulk density 0.53g/cm3
Fineness (<74μm, %) ≥98%
Advantages
Exerts gelling efficiency over a wide range of intermediate and low polarity
Easy dispersing
The gel is colourless and of high clarity
Produce reproducible thixotropic consistency over a wide temperature range
Imparts particle suspension, sag resistance without impairing flow and leveling, preventing hard settling of pigment and fillers
Exerts strong film reinforcing action in organic binder systems
Application
Organoclay CP-180 is used in the following applications: Oil drilling mud (Diesel oil ).
Organoclay CP-180 disperses under high shear and requires a polar activator (30%~40%) for best efficiency. Heat is not required to obtain good dispersion. Addition levels are typically in 0.2%~2.0%. Polar activator (95% Ethanol or 95% Methanol) is needed. Normally addition level of polar activator is recommended to be 30%~40% of CP-180 in weight.
Safety
All safety information is provided in the Material Safety Data Sheets
Package
Kraft paper bag with PE liner or multi-wall paper sacks or customized. 25kg/bag or 22.68kg/bag or customized
Storage
Organoclay CP-180 has a shelf life of 2 years, and should be stored in ventilated cool and dry place.
Notice
The information on use is based on data which are believed reliable, but any recommendation or suggestion made are without guarantee or warranty, since the conditions of use are outside our control.
All products are sold on the conditions that purchasers shall make their own tests to determine the suitability of such products for their purpose and that all risks are assumed by user.
We disclaim any responsibility for damages resulting from careless or improper handling or use. Nothing herein is to be taken as permission, inducement or recommendation to practice any patented invention without a license.
Screen printing ink additives organoclay also is UV ink additives, Printing Ink Additives. It could help you increase pigment loading levels, improve substrate wetting, and improve the longevity of ink formulations.
Screen printing ink additives organoclay
Screen printing ink additives organoclay CP-250 is a kind of purified and modified organoclay rheological additive, designed especially for use in low to middle solvent system ink, such as planographic printing ink, New ink, gravure printing ink, etc. It has high gelling efficiency, fine thixotropy, and perfect anti-settling.
Whatever your formulating are waterborne, solvent-borne, or radiation-cured inks, Zhejiang Camp – Shinning New Material Co.Ltd has a broad portfolio of technical solutions for even your most challenging formulation problems.
Properties
Composition Organic derivative of a montmorillonite clay
Appearance Fine powder, light yellow
Moisture content (105℃,2hr) ≤3.5%
Loss on ignition (1000℃) 35%-38%
Bulk density 42g/cm3
Fineness (<74μm, %) ≥98%
Application
Screen printing ink additives organoclay CP-250 is used in the following applications:
Inks
Wood coating
Using
Screen printing ink additives organoclay CP-250 When it is used in ink, no need of polar solvent, heating. It is also added while stirring. The common addition level is 0.2%-2.0% of the total formulation. It depends on the actual test of customers.
Note:With High-speed dispersant of grinding machine, and properly prolong the dispersing time, better gelatin performance can be reached..
Safety
All safety information is provided in the Material Safety Data Sheets for Zhejiang Camp-Shinning New Material Co.,Ltd..
Package
Kraft paper bag with PE liner or multi-wall paper sacks or customized. 25kg/bag or 22.68kg/bag or customized
Storage
CP-250 has a shelf life of 2 years, and should be stored in ventilated cool and dry place.
Notice
The information on use is based on invention data which are believed reliable, but any recommendation or suggestion made is without guarantee or warranty, since the conditions of use are outside our control. All products are sold on the conditions that purchasers shall make their own tests to determine the suitability of such products for their purpose and that all risks are assumed by user.
—————————————————————————-
RFQ:
, How to get a quick quote for organoclay bentonite rheological additive?
Answer: organoclay uses include oil based drilling fluids, paints, coatings, grease lubricant, inks, fracture fluids.
2), Question: What Is Organoclay?
Answer: Organoclay is a modified bentonite clay. In another words,organoclay are produced by modifying bentonite clay with quaternary amines. Organoclay is derived from a naturally raw bentonite clay mineral. By exchanging the original interlayer cations for organocations (typically Alkyl Quaternary Ammonium Bentonite). surfactant that contains a nitrogen iron. the nitrogen and ion exchanges onto the clay platelet for sodium. The amines used are of the long-chain type with 12 to 18 carbon atoms, After 20 percent of the clay surface is coated with these amines if becomes the hydrophobic end, with certain amines organoclay.
, Question: What are the types of Organoclay rheological additive?
Answer: Organoclay types include solvent-based organoclay, waterborne organoclay, easy dispersing organoclay, Pre gel organoclay, paints organoclay, grease organoclay, drilling organically, inks organoclay rheological additive, coatings organoclay etc.
, What about the organoclay price?
organoclay price, There are many grades of organoclay, different applications, the organoclay price is different. If you want to get an organoclay price, pls tell us your organoclay applications.
How to make an organoclay?
We hope the below photo could answer your question about how to make organoclay?
How to make organoclay
, How many days can we receive the organoclay in our destination port?
In general, we are able to make our shipments in 5-10days after getting the official order. And it can take about 7-30 days depending on the distance and transportation way to arrive at the final port. These days can show slight variations according to the season and organoclay.
, What is the min order amount that we can buy directly from China via vessel?
The total amount should be at least 1MT (one pallet). We are not recommending loading less than one pallet because of organoclay safety inside the container. If you need less than 1 MT, it’s better to make the delivery with air cargo.
, How many types of packaging methods are there for your organoclay bentonite rheological additive?
Packing of organoclay bentonite rheological additive : 25Kg/Bag, 22.68kg (50lb)/Bag, 1MT/bag or 500kg/Bag. Kraft paper bag with PE liner or multi-wall paper sacks or customized.
, Which countries do your organoclay bentonite rheological additive sell particularly well?
Our organoclay bentonite (organophilic clay) sold very well in Russia, Mexico, Brazil, Argentia, UAE, Saudi Arabia, Canada, Nigeria, etc. They are mainly used for oil-based drilling mud and fracture fluids.
, Are you able to produce or adjust specifically modified bentonite organoclay for our own formulation?
Well, our experienced technical team and high tech laboratories are able to check your special requests and we can produce many different modified organoclays for each different end user. Pls just contact with our sales representatived to get more organoclay info.
Organoclay density organoclay thickener organoclay rheology agent
Suspending Agent For Suspension | organophilic clay
About Us
Zhejiang Camp-Shinning New Material Co.Ltd is a professional total solution provider of Primary and secondary emulsifiers in China. Our other main products are bentonite Organoclay rheological additive | Organophilic clay. They are all used for oil drilling mud.
We are an ISO certified company. We cooperate with many world-renowned oil service companies. They helped us improve the quality, and we also provided relatively stable quality and cost – effective bentonite Organoclay rheological additive | Organophilic clay to help them occupy the market.
Our hot products
Primary and secondary emulsifiers
Organophilic clay
Organophilic lignite
Above products belong to drilling additive, drilling mud additive.
Applications:
Oil drilling mud (Diesel oil, mineral oil or Synthetic oil)
We have our own raw bentonite mine in the North of China.
Free samples for customers on request.
Fast delivery time ( About 7 to 10 work days after we receive your deposit.
Customer Service:
Pls feel free to contact us if you have any problems before purchasing organoclay or Primary and secondary emulsifiers .Any questions will be replied to within 24 hours except for the hoilday.
Printing Ink Additives Organoclay Rheological Additive also is a UV ink additives, screen printing ink additives. It could help you increase pigment loading levels, improve substrate wetting, and improve the longevity of ink formulations.
Printing Ink Additives Organoclay
Printing Ink Additives Organoclay Rheological Additive CP-250 is a kind of purified and modified organoclay rheological additive, designed especially for use in low to middle solvent system ink, such as planographic printing ink, New ink, gravure printing ink, etc. It has high gelling efficiency, fine thixotropy, and perfect anti-settling.
Whatever your formulating are waterborne, solvent-borne, or radiation-cured inks, Zhejiang Camp – Shinning New Material Co.Ltd has a broad portfolio of technical solutions for even your most challenging formulation problems.
Properties
Composition Organic derivative of a montmorillonite clay
Appearance Fine powder, light yellow
Moisture content (105℃,2hr) ≤3.5%
Loss on ignition (1000℃) 35%-38%
Bulk density 42g/cm3
Fineness (<74μm, %) ≥98%
Application
CP-250 is used in the following applications:
Inks
Wood coating
Using
CP-250 When it is used in ink, no need of polar solvent, heating. It is also added while stirring. The common addition level is 0.2%-2.0% of the total formulation. It depends on the actual test of customers.
Note:With High-speed dispersant of grinding machine, and properly prolong the dispersing time, better gelatin performance can be reached..
Safety
All safety information is provided in the Material Safety Data Sheets for Zhejiang Camp-Shinning New Material Co.,Ltd..
Package
Kraft paper bag with PE liner or multi-wall paper sacks or customized. 25kg/bag or 22.68kg/bag or customized
Storage
CP-250 has a shelf life of 2 years, and should be stored in ventilated cool and dry place.
Notice
The information on use is based on data which are believed reliable, but any recommendation or suggestion made is without guarantee or warranty, since the conditions of use are outside our control. All products are sold on the conditions that purchasers shall make their own tests to determine the suitability of such products for their purpose and that all risks are assumed by user. We disclaim any responsibility for damages resulting from careless or improper handling or use. Nothing herein is to be taken as permission, inducement or recommendation to practice any patented invention without a license.
—————————————————————————-
RFQ:
, How to get a quick quote for organoclay bentonite rheological additive?
Answer: organoclay uses include oil based drilling fluids , paints,coatings,grease lubricant,inks, fracture fluids.
2), Question: What Is Organoclay ?
Answer: Organoclay is a modified bentonite clay. In another words,organoclay are produced by modifying bentonite clay with quaternary amines. Organoclay is derived from a naturally raw bentonite clay mineral. By exchanging the original interlayer cations for organocations (typically Alkyl Quaternary Ammonium Bentonite). As an organophilic bentonite clay, consisting of covalently linked organic moieties. (Quaternary amine is a type of surfactant that contains a nitrogen iron. the nitrogen and ion exchanges onto the clay platelet for sodium. The amines used are of the long-chain type with 12 to 18 carbon atoms, After 20 percent of the clay surface is coated with these amines if becomes the hydrophobic end, with certain amines organoclay.
, Question: What are the types of Organoclay rheological additive?
Answer: Organoclay types include solvent-based organoclay, waterborne organoclay, easy dispersing organoclay, Pre gel organoclay, paints organoclay, grease organoclay, drilling organically, inks organoclay rheological additive, coatings organoclay etc.
, What about the organoclay price?
organoclay price, There are many grades of organoclay, different applications,the organoclay price is different. If you want to get an organoclay price, pls tell us your organoclay applications.
, How to make organoclay?
We hope the below photo could answer your question about how to make organoclay?
How to make organoclay
, How many days can we receive the organoclay in our destination port?
In general, we are able to make our shipments in 5-10days after getting the official order. And it can take about 7-30 days depending on the distance and transportation way to arrive at the final port. These days can show slight variations according to the season and organoclay.
, What is the min order amount that we can buy directly from China via vessel?
The total amount should be at least 1MT （one pallet). We are not recommending loading less than one pallet because of organoclay safety inside the container. If you need less than 1 MT， it’s better to make the delivery with air cargo.
, How many types of packaging methods are there for your organoclay bentonite rheological additive?
Packing of organoclay bentonite rheological additive ： 25Kg/Bag，22.68kg (50lb)/Bag, 1MT/bag or 500kg/Bag. Kraft paper bag with PE liner or multi-wall paper sacks or customized.
, Which countries do your organoclay bentonite rheological additive sell particularly well?
Our organoclay bentonite (organophilic clay）sold very well in Russia, Mexico, Brazil, Argentia, UAE, Saudia Arabia, Canada, Nigeria, etc.They are mainly used for oil-based drilling mud and fracture fluids.
，Are you able to produce or adjust specifically modified bentonite organoclay for our own formulation?
Well, our experienced technical team and high tech laboratories are able to check your special requests and we can produce many different modified organoclays for each different end user. Pls just contact with our sales representatived to get more organoclay info.
Organoclay density organoclay thickener organoclay rheology agent
Suspending Agent For Suspension | organophilic clay
About Us
Zhejiang Camp-Shinning New Material Co.Ltd is a professional total solution provider of Primary and secondary emulsifiers in China. Our other main products are bentonite Organoclay rheological additive | Organophilic clay. They are all used for oil drilling mud.
We are an ISO certified company. We cooperate with many world-renowned oil service companies. They helped us improve the quality, and we also provided relatively stable quality and cost – effective bentonite Organoclay rheological additive | Organophilic clay to help them occupy the market.
Our hot products
Primary and secondary emulsifiers
Organophilic clay
Organophilic lignite
Above products belong to drilling additive, drilling mud additive.
Applications :
Oil drilling mud ( Diesel oil , mineral oil or Synthetic oil ）
We have our own raw bentonite mine in the North of China.
Free samples for customers on request.
Fast delivery time ( About 7 to 10 work days after we receive your deposit.
Customer Service ：
Pls feel free to contact us if you have any problems before purchase organoclay or Primary and secondary emulsifiers .Any questions will be replied to within 24 hours except for the hoilday.
