Posted on

THICKENT W—HPMC

THICKENT

THICKENT CP-1 | Organoclay

Product introduction: THICKENT W series is a special organic modified clay . It can be dispersed both in aqueous system and solvent system. Especially, It has excellent behavior in water-borne system. It can replace cellulose such as HEC and HPMC in water-borne coatings, construction mortar,ceramics.

THICKENT CP-1 | Organoclay

Typical properties: *Excellent water retention (Superior water retention to HEC and HPMC). *Wide viscosity range (Cover all viscosity range of cellulose). *Fine temperature tolerance. It can disperse in cold water or in hot water. *High adhesion and strengthening, it can be used as adhesive agent in printing and dyeing in textile industry. *High thixotropy *THICKENT W has good coordination with cellulose, it can be used together with HEC or HPMC. Normally, the ratio of THICKENT W3 and cellulose is 80%:20%.

THICKENT CP-1 | Organoclay

Specification:
Item Index Type Concentration(%) Viscosity(mPa.s25℃),RV7-60r/min
Appearance White powder       THICKENT W3 2% 1500~2500
Particle size, 200mesh ≥95%
Moisture content ≤12%
Bulk density,kg/m3 430
PH(solution) 8.0~10.0
Note: Viscosity testing condition: water solution at 25℃,tested by Brookfield DV-Ⅱ VISCOMETER, Rotor Rotate speed RV7 Application:
  1. Cement-based mortar
  • THICKENT W3 has good thickening performance in mortar and can improve mortar’s rheology. With THICKENT W3, mortar is more slippy and easier for workers to coat on wall. It can Prolong construction time of mortar, and create higher working efficiency. It is helpful for mortar to form high intension during solidification.
  1. Putty
  • THICKENT W3 has good water-retention performance in putty, and it can prevent putty to be dewatering and crack, and prolong construction time. THICKENT W3 has anti-skinning performance and is helpful for putty to have high intension during solidification.
  1. Thermal insulation mortar (mainly for Bonding mortar and overlay mortar)
  • With its high water-retention thixotropy and adhesion, THICKENT W3 can prolong construction time of mortar and create higher working efficiency. It gives fine surface and slippery feeling of the mortar and improve surface quality by its shrinkability and anticracking. It is helpful for mortar to form high intension during solidification. and improve bond strength.
Interface treatment binder
  • THICKENT W3 is good thickening agent for interface treatment binder. It can increase tensile strength and anti-shear strength, and make the binder to have better adhesion and binding strength.
  1. Ceramic tile
◆ THICKENT W3 can be used in ceramic tile as water retention agent,adhesive. With its perfect water retention and adhesion, ceramic tile can be strength enough to avoid crack and easier to be constructed.
  1. Emusion coatings and other water-borne paint.
  • With its high thickening and thixotropy, it can be used to replace HEC in Emusion coatings and other water-borne paint as rheological additive, film-forming agent, adhesive, emulsifierand stabilizer. It also can be used together with HEC in a proper ratio.
  1. Printing and dyeing in textile.
  • Used as adhesive
Package and Storage: ◆ Package: Craft paper bag with PE liner.  The weight of each package is 20kg or 25kg. ◆ Store condition: Keep it in Dry and sealed. places at the TEMP. of 0℃-30℃. ◆ Validity:12months from the date of manufacturing.
Ask A Quote
Posted on

Water based organoclay rheological additive CP-EWB

THICKENT

Water based organoclay rheological additive CP-EWB

Water based organoclay rheological additive CP-EWB is water based inorgano clay rheological additive. It is mainly used in water based system.

Properties

Composition                       Inorganic modified montmorillonite clay

Appearance                       Fine powder, white

Moisture content (105℃,2hr)         ≤10%

Bulk density                       0.40~0.60g/cm3

Fineness (<74μm, %)               ≥98%

Advantages

  • High gelling effectiveness,
  • Easy dispersing
  • Prevents pigment setting
  • High thixotropy, good anti-sag property

Application

  • Industrial water reducible paint
  • Toothpaste and tooth polish
  • Cream and Lotions
  • Emulsion paint
  • Pigment and blung water
  • Paints including decorative paint, industrial paint
  • Grease
  • Inks
  • Oil drilling mud
  • Cleaning agent
  • Oil putty
  •  

Using

CP-EWB it can be added directly in powder, with its addition to be 0.2~3.0%. Procedures are as follow.

  1. water (PH:7.0-8.0)
  2. CP-EWB (Dispersing at high speed for 20-30minutes)
  3. Additive
  4. Pigment and filler (Mixing and dispersing)
  5. Emulsion (Mixing).
  6. Post correct.

Safety

All safety information is provided in the Material Safety Data Sheets for Zhejiang Camp-Shinning New Material Co.,Ltd..

Package

Kraft paper bag with PE liner or multi-wall paper sacks or customized. 25kg/bag or 22.68kg/bag or customized

Storage

CP-EWB has a shelf life of 2 years, and should be stored in ventilated cool and dry place.

 

Zhejiang Camp-Shinning New Material Co.Ltd

(TEL)  0086-13185071071

E-MAIL:  [email protected]

WEB:  www.rheologicaladditive.com

 

We are now looking for Global Distributors, Welcome to cooperate with us ! 

⇒ You are welcome to send us an email to know the latest information about organoclay. If you are interested, we will send you the latest catalogue, or free organoclays samples for testing.

 

E-MAIL:  [email protected]

WEB:  www.rheologicaladditive.com  

Ask A Quote
Posted on

Modified Bentonite CP-10

THICKENT

Modified Bentonite

Organobentonite CP-10 is a kind of organo clay rheological additive. It is used in systems of non-polar to medium polarity aliphatic and other solvents (ketones, ester, ether esters, alcohols, aromatic).  

Modified Bentonite Properties

Composition                      Organic derivative of a montmorillonite clay

Appearance                       Fine powder,white

Moisture content (105℃,2hr)         ≤3.5%

Loss on ignition (1000℃)            30%-34%

Bulk density                       0.35~0.45g/cm3

Fineness (<74μm, %)               ≥98%

Dispersion fineness (μm)            ≤40

Modified Bentonite Advantages

  • High efficiency
  • The gel is of light colour and high clarity
  • Easy to use, no need to pregel
  • Eliminate polar activator
  • Consistent development of rheology
  • Can be used to post correct

Application

Organic clay Bentonite CP-10 is used in the following applications:

  • Paints
  • Sealants &adhesives
  • Inks
  • Cosmetic
  • Nano-composite

Using

Modified Bentonite CP-10 can be added directly in powder without polar activator and making pre-gel. But better performance may achieve if polar activator is added and pre-gel procedure is affected.

The addition is recommended to be before grinding procedure to get the best effectiveness. Addition level is commonly 0.2%~1.0%. 

Package

Kraft bag or kraft complex interior with PE or customized.

Storage

Organiclay CP-10 has a shelf life of 2 years, and should be stored in ventilated cool and dry place.

Ask A Quote
modified bentonite
Posted on

organo clay modified bentonite CP-34

organo clay modified bentonite

Organo clay modified bentonite CP-34

CP-34 is an organo clay (modified bentonite), designed especially for use  in solvent based system. It can be used widely in solvents from low polarity to medium-high polarity.

Organoclays is mainly used in paints and coatings, oilfield drilling and fracturing fluids, grease adhesives, cosmetics and other fields. Organophilic clay is mainly used as a thickener, suspending agent, rheology additive, and thixotropic agent. It has outstanding performance in anti-settling and anti-sag properties.

Properties | Organo clay modified bentonite

Composition                      Organic derivative of a montmorillonite clay

Appearance                       Fine powder, light yellow

Moisture content (105℃,2hr)         ≤3.5%

Loss on ignition (1000℃)            28%-30%

Bulk density                       0.53g/cm3

Fineness (<74μm, %)               ≥98%

Advantages | Organo clay modified bentonite

High gelling efficiency

Light color gel

Produce reproducible thixotropic consistency over a wide temperature range

Imparts particle suspension, preventing hard settling of pigment and fillers.

Exerts strong film reinforcing action in organic binder systems.

Application

CP-34 is used in the following applications:

Marine paint, Industrial paint, heavy-duty, anticorrosion paint such as bituminous coatings, polyester paints, Alkyd paints.

Sealant

Inks

Grease

Unsaturated polyester putty

Using

CP-34 disperses under high shear and requires a polar activator for best efficiency. Heat is not required to obtain good dispersion. Addition levels are typically in 0.2%~2.0%. Polar activator (95% Ethanol or 95% Methanol) is needed. Normally addition level of polar activator is recommended to be 40%~50% of CP-34 in weight. If in xylene system, addition level of polar activator is about 30%-40% of CP-34 in weight.

Pre-gel is made as below procedure.

Charge solvent to mill

Slowly add CP-34(6-10% by weight of total pregel) to mill under agitation.

Mix at high speed for 5 minutes.

Add polar activator.

Mix at high speed for 5 minutes.

Package

Kraft paper bag with PE liner or multi-wall paper sacks or customized. 25kg/bag or 22.68kg/bag or customized

Ask A Quote
Posted on

organo clay (modified montmorillonite)CP-27

organo clay (modified montmorillonite)

organo clay (modified montmorillonite)

organo clay (modified montmorillonite)CP-27 is an organo clay (modified montmorillonite), designed especially for use in solvent based system. It is used especially in solvents of high polarity.

Properties | organo clay (modified montmorillonite)

Composition                      Organic derivative of a montmorillonite clay

Appearance                       Fine powder, light yellow

Moisture content (105℃,2hr)         ≤3.5%

Loss on ignition (1000℃)            34.7%

Bulk density                       0.53g/cm3

Fineness (<74μm, %)               ≥98%

Advantages | organo clay (modified montmorillonite)

  • High gelling efficiency
  • Produce reproducible thixotropic consistency over a wide temperature range
  • Imparts particle suspension, preventing hard settling of pigment and fillers
  • Exerts strong film reinforcing action in organic binder systems

Application

CP-27 is used in the following applications:

  • Marine paint, Industrial paint, heavy-duty, anticorrosion paint (especially forepoxy paint)
  • Grease
  • Ink
  • Sealant
  • Unsaturated polyester putty

Using

CP-27 disperses under high shear and requires a polar activator for best efficiency. Heat is not required to obtain good dispersion. Addition levels are typically in 0.2%~2.0%. Normally addition level of polar activator (95% Ethanol or 95% Methanol) is recommended to be 45%~60% of CP-27 in weight.

Package

Kraft paper bag with PE liner or multi-wall paper sacks or customized. 25kg/bag or 22.68kg/bag or customized

We sincerely welcome you to inquire about our ORGANOCLAY products or request samples. Our samples are free and we provide you with a one-stop application solution.

You will need a lot of guidance and service during your use, and our technical department will provide you with a series of services.

The application of organic bentonite in oilfield drilling paints, coatings, inks, and lubricants has been widely welcomed and accepted in the market.

Looking forward to your inquiry.

Posted on

organo clay rheological additive CP-EZ

Organo clay rheological additive

organo clay rheological additive CP-EZ

Organo clay rheological additive CP-EZ is a kind of organo clay rheological additive.Especially organoclays is recommended to be applied in medium polarity and high polarity system including aromatic and aliphatic solvent. If you are producing paints, coatings, drilling fluids, inks, greases, sealants, and cosmetics, then our organic bentonite clay is undoubtedly your best choice for thickening rheology modifier.

Properties | organo clay rheological additive CP-EZ

Composition                      Organic derivative of a montmorillonite clay Appearance                       Fine powder, light yellow Moisture content (105℃,2hr)         ≤3.5% Loss on ignition (1000℃)            35%-37% Bulk density                       0.40~0.60g/cm3 Fineness (<74μm, %)               ≥99% Dispersion fineness (μm)            ≤10

Advantages | organo clay rheological additive CP-EZ

  • Easy dispersing, fine particle size
  • High purity and low silica content
  • High viscosity and thixotropy
  • Eliminate polar activator in medium and high polarity solvent
  • Wide application range. It can be applied in almost all resins and solvents
Application CP-EZ is used in the following applications:
  • Paints including decorative paint, industrial paint
  • Grease
  • Inks
  • Oil drilling mud
  • Cleaning agent
  • Oil putty
Using CP-EZ can be added directly in powder under high shear condition. The addition is recommended to be before grinding procedure to get the best effectiveness. Addition level is commonly 0.2%~1.0%. In low polarity system such as mineral spirit, if polar activator is added, better efficiency can be achieved. Dosage of polar activator is suggested to be 10%-20% of CP-EZ by weigh    
Ask A Quote