Oil Based Emulsifier | Primary And Secondary Emulsifiers
Camp Shinning is a professional supplier of oil based emulsifier in China. Chemical composition of emulsifier is Alkylphenol and ethylene oxide condensate.
primary and secondary emulsifiers are easily soluble in oil and other organic solvents, dispersible in water, with good emulsifying properties, used as W/O emulsifier in obm drilling mud industry;
A part of emulsifier manufacturers in india, there are difference between primary and secondary emulsifiers.
Typical Properties:
Appearance Light Amber Liquid
Oil Based Emulsifier ,primary and secondary emulsifiers ,primary and secondary emulsifier differences
Viscosity (cps) 20 – 45
Density 0.87 – 1.00 g/cm3
Advantages
-
Helps lower filtration rates
-
Helps form stable water-in-oil emulsions
-
Resists electrolyte contamination
-
Helps impart high temperature stability to oil-based fluids Can be added directly to the system
We are pleased to offer CPMUL-P with specification as below:
- Phisico-chemical Specification
Appearance: dark mobile liquid
Odor: no or slight odor
Specific Gravity (20℃): 0.93~ 1.03
Flush Point (PMCC): > 65oC (149oF)
Pour Point: < -10oC (14oF)
Solubility: soluble in oil. Insoluble in water.
- Mud Performance Specification
Yield Point (YP): 10 – 20 lb/100ft2
Electrical Stability (ES): minimum 500 Volt
HTHP Filtrate @ 121oC (250oF), 500psi: maximum 12ml
Mud Performance Test
- Warm the mud to 49oC (120oF). Test R600 (dial reading at 600rpm of Fann 35 VG Meter), R300, R200, R100, R6, R3, 10-seconds gel strength and 10-minutes gel strength. Calculate Yield Point
(YP):YP= 2xR300 – R600 (lb/100ft2)
- Hot roll the test mud in a hot roller at 121oC (250oF) for 16 hours. After hot rolling, cool the mud to 49oC (120oF), then test R600, R300, R200, R100, R6, R3, 10-seconds gel strength and 10-minutes gel strength. Calculate Yield Point (YP):
YP= 2xR300 – R600 (lb/100ft2)
- Electric Stability (ES) is tested always at room temperature. ES is tested before and after hot rolling. Before testing ES, stir the mud at 6000rpm for 10 minutes on Hamilton Beach Mixer.
- HTHP filtrate is tested after hot rolling. Test is at 121oC (250oF) and 500psi pressure differential. Collect the filtrate for 30 minutes.
As a leading Organophilic Clay Supplier, Zhejiang Camp-Shinning New Material Co.Ltd could also supply organophilic clay , organophilic lignite and Emulsifier | Primary Emulsifier , Secondary Emulsifier .
Organoclay manufacturer in China
Please contact Zhejiang Camp-Shinning New Material Co.Ltd or request a quote or samples of organoclay today. Organoclay For Sale.
Cel(whatsapp): 86-13185071071
Oil Based Emulsifier | Primary And Secondary Emulsifiers