Posted on

Drilling Fluid Additives | Rheology Modifier | Drilling Fluid and Mud Additives

Drilling Fluid Additives | Rheology Modifier

Drilling Fluid Additives | Rheology Modifier | Drilling Fluid and Mud Additives

Organoclay is a drilling fluid rheology. As a petroleum additives, drilling rheology modifier could use for fracturating fluids and Oil Based Mud.Fluid rheology additive is very stable at temperatures approaching 176ºC.

drilling fluid rheology

  1. mud rheology
    mud rheology

    Rheology Modifier CP-992 Advantages:

  •  Impart viscosity and suspension properties to oil-based drilling fluids.
  • Used to gel oil drilling fluids for long-term suspension of weighting agents in drilling and packer fluids.
  • Stable at temperatures approaching 176ºC
  •  Aids in filtration control
  • Usually preferred in mineral oil based fluids. Should not be used in high performance clay-free oil based drilling fluids.
     
    2. Typical Properties: mud rheology | Drilling Fluid Additives | Rheology Modifier
ColorAppearanceDensityMoisture
(@105ºC,2hrs)		Fineness through 200meshLoss on Ignition
( @1000ºC )
LightYellowFree Flowing Powder1.6g/cm3≤4.0%≥84%≥37%

3.  Typical Applications: 
Helps viscosify any oil-based drilling fluid
Helps improve hole cleaning during drilling and workover operations
Gel oil muds for long-term suspension of weighting agents in packer fluids and casing packs

drilling fluid rheology

drilling fluid rheology
drilling fluid rheology , mud rheology

Application

 Base oil:

Diesel Oils 

Crude Oils

Mineral Oils

Synthetic Oil

Viscosifying drilling Fluids:

Oil based drilling fluids 

Invert emulsion fluids

Workover fluids

Completion fluids

Casing packs

Packer fluids

Spotting fluids

Package

Mud rheology Organophilic Clay is packed in 50lb(22.7kg) or 25kg/bag or customized,multi-wall paper sacks or Kraft paper bag with PE liner or customized.

 

Storage

Mud rheology Store in a dry, well-ventilated area with temperature of 0℃-30℃.  Keep container closed. The quality guarantee period is 24 months.

Notice

The information on use is based on data which are believed reliable, but any recommendation or suggestion made is without guarantee or warranty, since the conditions of use are outside our control. All products are sold on the conditions that purchasers shall make their own tests to determine the suitability of such products for their purpose and that all risks are assumed by user.

We disclaim any responsibility for damages resulting from careless or improper handling or use. Nothing herein is to be taken as permission, inducement or recommendation to practice any patented invention without a license.

 

Mail:  [email protected] 

Mob:  0086-131 85 071 071

 
mud rheology
Drilling fluid rheology

 

 

Ask A Quote
Posted on

Rheology modifier thickener for automotive and industrial lubricating greases

Modified bentonite clay

Rheology modifier thickener for automotive and industrial lubricating greases

Rheology modifier thickener CP-250A is a kind of purified rheological additive, modified organoclay designed especially for using in automotive and industrial lubricating greases based on synthetic oils such as vegetable oil, polyester oil. Organophilic bentonite has high gelling efficiency, fine thixotropy and perfect anti-settling.

1, Properties

Composition Organic derivative of a montmorillonite clay

Appearance                                               Fine powder, light yellow

Moisture content (105℃,2hr)                     ≤3.5%

Loss on ignition (1000℃)                           34%-36%

Bulk density                                                0.42g/cm3

Fineness (<74μm, %)                                 ≥98%

Commodity

 

Rheological additive

 

Chemical ingredientAlkyl Quaternary Ammonium bentoniteQuartz(SiO2)
CAS. No.68953-58-214808-60-7

2, Advantages

  • High efficiency
  • The gel is of light colour and high clarity
  • Easy to use, no need to pregel
  • Eliminate polar activator
  • Consistent development of rheology
  • Can be used to post correct

3,  Application

Rheology modifier thickener CP-250A is used in the following applications:

  • Grease Lubricant (the base oil is synthetic oil such as middle-high viscosity petroleum, mineral oil, diester oil, polyester oil, vegetable oil etc.)
  • Wood coating

4,  Using

When it is used in Grease Lubricant, polar activator is needed. Polar activator is acetone/water(95/5). The dosage of activator is 20%-30% of the weight of Rheology modifier thickener  CP-250A. And also high shear can promote the dispersing of CP-250A.

Adding procedure as follows:

  • If condition permits, heat the base oil to 60~70℃
  • Add CP-250A while stirring, addition level is 7%-10% of the total formulation. Stir 5~10minutes
  • Add polar activator, addition level is 2%-3% of the total formulation. Then add other additives, stir 25~30minutes.
  • Use pump to help it pass colloid grinding and homogenizer.
  • Deair, filtrate, pack.

5, Note:

With High-speed dispersant of grinding machine, and properly prolong the dispersing time, better gelatin performance can be reached.

The Lubricanting grease which uses organoclay as thickener will own high dropping point, thus can be used under high temperature and presents good impermeability and water resistance.

6, Safety

All safety information is provided in the Material Safety Data Sheets for Zhejiang Camp-Shinning New Material Co.,Ltd..

7, Package

Outside the package of kraft paper bag, the inner packing uses the double layer packing of the polyethylene film bag, or the paper bag packing, the weight is usually 25 + 0.25kg,  or 22.68kg/bag or customized 

8, Storage

Grease Lubricant additive Organoclay CP-250A has a shelf life of 2 years, and should be stored in ventilated cool and dry place.

9, Notice

The information on use is based on data which are believed reliable, but any recommendation or suggestion made are without guarantee or warranty, since the conditions of use are outside our control. All products are sold on the conditions that purchasers shall make their own tests to determine the suitability of such products for their purpose and that all risks are assumed by user. We disclaim any responsibility for damages resulting from careless or improper handling or use. Nothing herein is to be taken as permission, inducement or recommendation to practice any patented invention without a license.

Rheology modifier thickener

Mail:  jessie@ camp-shinning.com

Mob: 0086-131 85 071 071

Ask A Quote
Posted on

Grease additive modified clay for grease lubricant

OBM grade organophilic Clay

Grease additive modified clay for grease lubricant

Grease additive modified clay CP-250A is a kind of purified and modified rheology modifier,organoclay rheological additive designed especially for using in Grease based on synthetic oils such as vegetable oil, polyester oil. Organophilic clay has high gelling efficiency, fine thixotropy and perfect anti-settling.

Properties

                 Composition                      Organic derivative of a montmorillonite clay

                 Appearance                       Fine powder, light yellow

                 Moisture content (105℃,2hr)         ≤3.5%

                 Loss on ignition (1000℃)            34%-36%

                 Bulk density                       0.42g/cm3

                 Fineness (<74μm, %)               ≥98%

Advantages

  • High efficiency
  • The gel is of light colour and high clarity
  • Easy to use, no need to pregel
  • Eliminate polar activator
  • Consistent development of rheology
  • Can be used to post correct

Application

Grease additive modified clay CP-250A is used in the following applications:

  • Grease Lubricant(the base oil is synthetic oil such as middle-high viscosity petroleum, mineral oil, diester oil, polyester oil, vegetable oil etc.)
  • Wood coating 

Using

When it is used in Grease Lubricant, polar activator is needed. Polar activator is acetone/water(95/5). The dosage of activator is 20%-30% of the weight of CP-250A. And also high shear can promote the dispersing of CP-250A.

Adding procedure as follows:

  1. If condition permits, heat the base oil to 60~70℃
  2. Add CP-250A while stirring, addition level is 7%-10% of the total formulation. Stir  5~10minutes
  3. Add polar activator, addition level is 2%-3% of the total formulation. Then add other additives, stir 25~30m
  4. Use pump to help it pass colloid grinding and homogenizer.
  5. Deair, filtrate, pack.

Note: With High-speed dispersant of grinding machine, and properly prolong the dispersing time, better gelatin performance can be reached.

The Lubricanting grease which uses organoclay as thickener will own high dropping point, thus can be used under high temperature and presents good impermeability and water resistance.

Safety

All safety information is provided in the Material Safety Data Sheets for Zhejiang Camp-Shinning New Material Co.,Ltd..

Package

Kraft paper bag with PE liner or multi-wall paper sacks or customized. 25kg/bag or 22.68kg/bag or customized

Storage

CP-250A has a shelf life of 2 years, and should be stored in ventilated cool and dry place.

Notice

The information on use is based on data which are believed reliable, but any recommendation or suggestion made are without guarantee or warranty, since the conditions of use are outside our control. All products are sold on the conditions that purchasers shall make their own tests to determine the suitability of such products for their purpose and that all risks are assumed by user. We disclaim any responsibility for damages resulting from careless or improper handling or use. Nothing herein is to be taken as permission, inducement or recommendation to practice any patented invention without a license.

If you are interesting our modified clay for grease,pls #Mail us:

[email protected]

Mob: 0086-131 85 071 071

Ask A Quote
Posted on

Polymer Oilfield Chemicals Polymer salt tolerance for Fluid Loss Control

Polymer Oilfield Chemicals

Polymer Oilfield Chemicals Polymer salt tolerance for Fluid Loss ControlPolymer Polymer additive with white to light-yellow appearance was polymerized by heat resistance and salt tolerance allyl monomers. It provides better rheology regulation and fluid loss control.

 Polymer has some advantages as follows:

low viscosity effect in mud by special molecular structure;

superior function in fresh mud and brine mud;

Better heat resistance in fluid loss system;

Perfect anti-sloughing and clay hydration control performance.

Performance evaluation

Rheology and fluid loss

table1 rheology and fluid loss

mud typehot rolling150℃×16hAVmpa.sFLmL
4%NaClbefore hot rolling217.4
after hot rolling1510.2
saturated brinebefore hot rolling228.0
after hot rolling1610.4

*Brine+10% benonite+0.3%NaCO3+2%polymer product.

Anti-sloughing and clay hydration control performance 

table2 anti-sloughing and clay hydration control performance

sampleexpansion coefficient reduction rate   %cuttings rolling recovery%
Acrylic acid – acrylamide copolymer51.289.0
polymer productDrilling Polymer58.491.4

Mail:   [email protected]

Mob:  0086-131 85 071 071

Posted on

Drilling Polymer with heat resistance and salt tolerance for Fluid Loss Control

Amine treated bentonite organoclay

Drilling Polymer with heat resistance and salt tolerance for Fluid Loss Control

Drilling Polymer with white to light-yellow appearance was polymerized by heat resistance and salt tolerance allyl monomers. Polymer provides better rheology regulation and fluid loss control.

 Polymer has some advantages as follows:

low viscosity effect in mud by special molecular structure;

superior function in fresh mud and brine mud;

Better heat resistance in fluid loss system;

Perfect anti-sloughing and clay hydration control performance.

Performance evaluation

Rheology and fluid loss

table1 rheology and fluid loss

mud type

hot rolling

150℃×16h

AV

mpa.s

FL

mL

4%NaClbefore hot rolling217.4
after hot rolling1510.2
saturated brinebefore hot rolling228.0
after hot rolling1610.4

*Brine+10% benonite+0.3%NaCO3+2%polymer product.

Anti-sloughing and clay hydration control performance 

table2 anti-sloughing and clay hydration control performance

sampleexpansion coefficient reduction rate   %

cuttings rolling recovery

%

Acrylic acid – acrylamide copolymer51.289.0

polymer product

Drilling Polymer

58.491.4

Mail:   [email protected]

Mob:  0086-131 85 071 071

Ask A Quote
Posted on

Drilling Additive Organophilic Clay CP-E23

реологическая добавка

Drilling Additive Organophilic Clay CP-E23

Drilling Additive Organophilic Clay CP-E23 is a kind of organo clay rheological additive.  Especially it is recommended to be applied in medium polarity and high polarity system including aromatic and aliphatic solvent.  

Properties

                 Composition                      Organic derivative of a montmorillonite clay

                 Appearance                       Fine powder, light yellow

                 Moisture content (105℃,2hr)         ≤3.5%

                 Loss on ignition (1000℃)            35%-37%

                 Bulk density                       0.40~0.60g/cm3

                 Fineness (<74μm, %)               ≥99%

           Dispersion fineness (μm)            ≤10

Advantages

  • Easy dispersing, fine particle size
  • High purity and low silica content
  • High viscosity and thixotropy
  • Eliminate polar activator in medium and high polarity solvent
  • Wide application range. It can be applied in almost all resins and solvents

Application

Drilling Additive Organophilic Clay CP-E23 is used in the following applications:

  • Paints including decorative paint, industrial paint
  • Grease
  • Inks
  • Oil drilling mud
  • Cleaning agent
  • Oil putty

Using

Drilling Additive Organophilic Clay CP-E23 can be added directly in powder under high shear condition. The addition is recommended to be before grinding procedure to get the best effectiveness. Addition level is commonly 0.2%~1.0%. In low polarity system such as mineral spirit, if polar activator is added, better efficiency can be achieved.

Dosage of polar activator is suggested to be 10%-20% of CP-E23 by weigh

Safety

All safety information is provided in the Material Safety Data Sheets for Zhejiang Camp-Shinning New Material Co.,Ltd..

Package

Kraft paper bag with PE liner or multi-wall paper sacks or customized. 25kg/bag or 22.68kg/bag or customized

Storage

Drilling Additive Organophilic Clay CP-E23 has a shelf life of 2 years, and should be stored in ventilated cool and dry place.

Notice

The information on use is based on data which are believed reliable, but any recommendation or suggestion made is without guarantee or warranty, since the conditions of use are outside our control. All products are sold on the conditions that purchasers shall make their own tests to determine the suitability of such products for their purpose and that all risks are assumed by user. We disclaim any responsibility for damages resulting from careless or improper handling or use. Nothing herein is to be taken as permission, inducement or recommendation to practice any patented invention without a license.

Mail: [email protected]

Mob: 0086-131 85 071 071

Ask A Quote