Posted on

Drilling Mud Additive Rheological Additive Moisture 3.0% Improved Hole Cleaning Capacity

Economical rheology modifier

Drilling mud additive rheological additive Moisture 3.0% improved hole cleaning capacity

Rheological additive CP-138Y is an treated oil based bentonite clay. Drilling mud additive rheological additive Organoclay could use for viscosify any oil-based drilling fluid and Improve hole cleaning during drilling and workover operations. Rheology modifiers can make gel oil muds for long-term suspension of weighting agents in packer fluids and casing packs

1, Advantages

  • Improves cuttings carrying capacity and hole cleaning
  • Increases emulsion stability
  • Aids control of fluid loss to the formation
  • Cost-effectively builds viscosity and yield point
  • Suspends weighting materials and other solids

2, Typical properties

CompositionOrganic derivative of a montmorillonite clay
AppearanceFine powder, light yellow
Moisture content (105℃,2hr)≤3.5%
Loss on ignition max,%(1000℃)(32.5±1.5)%
Bulk density0.40~0.60g/cm3
Fineness (<74μm, %)≥99%
Dispersion fineness (μm)≤10

3, Application

Base oil:

  • Diesel Oils
  • Mineral Oils
  • Synthetic Oil
  • Linear and isomerized Alpha Olefins
  • Modified vegetable oil

Viscosifying drilling Fluids:

  • All oil based drilling fluids
  • Invert emulsion fluids
  • Workover fluids
  • Fracture fluids

4, Using

Drilling mud additive rheological additive can be added directly in powder under high shear condition. Addition level is commonly 0.1%~1.0% of total formulation by weight. Polar activator is required to achieve better performance. The addition procedure is suggested as below.

  • Add resin in solvent.
  • Add Drilling mud additive rheological additive CP-138Y under slow agitation.
  • Disperse under high speed for 10-15 minutes.
  • Add polar activator.
  • Disperse under high speed for 10-15 minutes.
  • Add wetting agent and other additive.
  • Grinding and next procedure.

If to make pre-gel, better efficiency can be achieved. Addition level in pre-gel is 5%-8% of total pre-gel in weight. Pre-gel procedure is as below.

  • Add solvent or solvent mixture.
  • Add Drilling mud additive rheological additive CP-138Y under slow agitation.
  • Disperse under high speed for 5-10 minutes.
  • Add polar activator.
  • Disperse under high speed for 5-10 minutes.

Polar activator is suggested to be ethanol/water (95/5), methanol/water (95/5) or acetone. Dosage of polar activator is as below.

5, Safety

All safety information is provided in the Material Safety Data Sheets for Zhejiang Camp-Shinning New Material Co., Ltd.

6, Package

Kraft paper bag with PE liner or multi-wall paper sacks or customized. 25kg/bag or 50LB/Sack or customized

7, Storage

Drilling mud additive rheological additive CP-982S Store in a dry, well-ventilated area with temperature of 0℃-30℃. Keep container closed. The quality guarantee period is 24 months.

8, Notice

The information on use is based on data which are believed reliable, but any recommendation or suggestion made is without guarantee or warranty, since the conditions of use are outside our control. All products are sold on the conditions that purchasers shall make their own tests to determine the suitability of such products for their purpose and that all risks are assumed by user. We disclaim any responsibility for damages resulting from careless or improper handling or use. Nothing herein is to be taken as permission, inducement or recommendation to practice any patented invention without a license.

 

Ask A Quote
Posted on

Petroleum chemical organophilic bentonite protect environment

الطين العضوي المضافات الريولوجية

Petroleum chemical organophilic bentonite protect environment Bulk density 0.40~0.60g/cm³

Organophilic bentonite could stable at temperatures approaching 350°F (177°C), Modifier rheology is a gray-tan powder , Specific gravity is 1.7 . Rheological additive is packaged in 50-lb (22.7-kg) sacks. Rheological additive is stable and has good suspension and thixotropic features.

1, Properties

Composition Organically modified bentonite clay

Appearance Off white to tan finely divided powder,

Moisture content (105℃,2hr) ≤3.5%

Particle size (<76μm or 200mesh) ≥98%

Specific Gravity 1.7

2, Advantages

  • Effectively suspends weighting materials and other solids
  • Controls settling with minimal increases in viscosity and gel strength
  • Reduces top separation of oil
  • Maintains suspension over a wide range of water contents
  • Maintains suspension over a wide temperature range
  • Increases the suspension of solids in fluids
  • thickened with organoclay gellants
  • Has little effect of filtration; this must be
  • controlled separately

3, Application

   Base oil:

  • Diesel Oils
  • Crude Oils
  • Mineral Oils
  • Synthetic Oil
  • Alpha Olefins
  •       Low BTEX base oil

Suspending solids in drilling fluids including:

  • Oil based drilling fluids
  • Invert emulsion fluids
  • Workover fluidsl
  • Completion fluids
  • Casing packs
  • Packer fluids
  • Spotting fluids

4, Safety

All safety information is provided in the Material Safety Data Sheets for Zhejiang Camp-Shinning New Material Co., Ltd.

5, Package

Kraft paper bag with PE liner or multi-wall paper sacks or customized. 25kg/bag or 22.68kg/bag or customized

6, Storage

Petroleum chemical organophilic bentonite CP-992 Store in a dry, well-ventilated area with temperature of 0℃-30℃. Keep container closed. The quality guarantee period is 24 months.

7, Notice

The information on use is based on data which are believed reliable, but any recommendation or suggestion made is without guarantee or warranty, since the conditions of use are outside our control. All products are sold on the conditions that purchasers shall make their own tests to determine the suitability of such products for their purpose and that all risks are assumed by user. We disclaim any responsibility for damages resulting from careless or improper handling or use. Nothing herein is to be taken as permission, inducement or recommendation to practice any patented invention without a license.

Ask A Quote
Posted on

Organo-montmorillonite in oil fields as thickeners and flow-control additives

Rheology modifiers for waterborne paints

Organo-montmorillonite in oil fields as thickeners and flow-control additives

Organo-montmorillonite clay rheological additive recommended for use in oil based muds. In addition to imparting excellent rheological properties, Organophilic bentonites increases the carrying capacity and hole cleaning capabilities of the drilling fluid. Rheological agent also has the secondary benefits of improving filtration control and emulsion stability

1, Advantages

  • Exerts strong film reinforcing action in organic binder systems
  • Exerts gelling efficiency over a wide range of intermediate and low polarity
  • Easy dispersing
  • The gel is colourless and of high clarity
  • Produce reproducible thixotropic consistency over a wide temperature range
  • Imparts particle suspension, sag resistance without impairing flow and leveling, preventing hard settling of pigment and fillers

2, Properties

Composition Organic derivative of a montmorillonite clay

Appearance Fine powder, white

Moisture content (105℃,2hr) ≤3.5%

Loss on ignition (1000℃) 29%-32%

Bulk density 0.53g/cm3

Fineness (<74μm, %) ≥98%

3, Organo-montmorillonite in oil fields Application

CP-180 is used in the following applications:

  • Paints & coatings with solvent of low to medium polarity
  • Powder Coating
  • Lubricant Grease, ink, sealant
  • Cosmetic
  •   Facture fluids

4, Using

CP-180 disperses under high shear and requires a polar activator (30%~40%) for best efficiency. Heat is not required to obtain good dispersion. Addition levels are typically in 0.2%~2.0%. Polar activator (95% Ethanol or 95% Methanol) is needed. Normally addition level of polar activator is recommended to be 30%~40% of CP-180 in weight.

5, Safety

All safety information is provided in the Material Safety Data Sheets for Zhejiang Camp-Shinning New Material Co.,Ltd..

6, Organo-montmorillonite in oil fields Package

Kraft paper bag with PE liner or multi-wall paper sacks or customized. 25kg/bag or 22.68kg/bag or customized

7, Organo-montmorillonite in oil fields Storage

Organo-montmorillonite in oil fields as thickeners and flow-control additives  CP-180 has a shelf life of 2 years, and should be stored in ventilated cool and dry place.

8, Notice

The information on use is based on data which are believed reliable, but any recommendation or suggestion made are without guarantee or warranty, since the conditions of use are outside our control. All products are sold on the conditions that purchasers shall make their own tests to determine the suitability of such products for their purpose and that all risks are assumed by user. We disclaim any responsibility for damages resulting from careless or improper handling or use. Nothing herein is to be taken as permission, inducement or recommendation to practice any patented invention without a license. Organo-montmorillonite in oil fields

Mail:  [email protected]

Mob: 0086-13185071071

Organo-montmorillonite in oil fields

Ask A Quote
Posted on

OBM Rheology Modifiers | Drilling Mud Chemicals

Rheology modifiers

OBM Rheology Modifiers | Drilling Mud Chemicals

OBM Rheology Modifiers CP-DRI is used in vertical drilling fluids to increase viscosity and filtration control. CP-DRI is also ideal in drilling fluids because it expands when exposed to water. This expansion helps down hole formations to be sealed from invading drilling fluids. The Drilling bentonite extracts the drill cuttings from around the drill bit, which are then floated to the surface. Bentonite also serves to cool and lubricate the drill bit as well as seals the drill hole against seepage and to prevent wall cave-ins. It is mainly use in fresh pure water rotary drilling conditions as water quality will affect bentonite performance.

Advantages:

Good suspension

High thixotropy

Little filtrated volume

Excellent capacity of making mud

Easy to adjust the density of the well drilling slurry

Typical properties:

Suspension Properties Specification
AppearanceOff-white powder
Viscometer dial reading at 600r/minMin.30
Plastic viscosity RatioMax.3
Filtrate volumeMax.15 ml
Residue of diameter greater than 200meshMax mass fraction 5.0%

Application:

OBM Rheology Modifiers CP-DRI is suitable for all type of freshwater mud rotary drilling.

CP-DRI can also be used as a seal for earthen structures, slurry trenching, tunnel boring and foundation drill.

Mixing and dosage:

Mixing ratios are based on the use of freshwater; water purity will affect bentonite performance. For best results, acidic and hard make-up water should be pretreated with SODA ASH to a pH of 8.5-9.5. Add PREMIUM GEL slowly through jet/hopper mixer.The quantity of bentonite used is variable depending upon the depth of the hole to be drilled. Generally one tonne of bentonite is used to prepare about 100 barrels of mud.

Packing:

25kg/bag; or 50kg/bag, packed by 800kg or 1000kg super sacks.

Ask A Quote
Posted on

Rheology Modifiers Viscosifiers CP-908 with easy dispersing

Rheology modifiers for waterborne paints

Rheology Modifiers Viscosifiers CP-908 is an organo clay (modified montmorillonite), designed especially for use in solvent based system including intermediate and low polarity range organic liquid.

Properties

Composition                      Organic derivative of a montmorillonite clay

Appearance                       Fine powder, white

Moisture content (105℃,2hr)         ≤3.5%

Loss on ignition (1000℃)            29%-32%

Bulk density                       0.53g/cm3

Fineness (<74μm, %)               ≥98%

Advantages

  • Exerts gelling efficiency over a wide range of intermediate and low polarity
  • Easy dispersing
  • The gel is colourless and of high clarity
  • Produce reproducible thixotropic consistency over a wide temperature range
  • Imparts particle suspension, sag resistance without impairing flow and leveling, preventing hard settling of pigment and fillers
  • Exerts strong film reinforcing action in organic binder systems

Application

Rheology Modifiers Viscosifiers CP-908 is used in the following applications:

  • Paints & coatings with solvent of low to medium polarity
  • Lubricant Grease, ink, sealant
  • Cosmetic
  • Oil drilling mud

Using

Rheology Modifiers Viscosifiers CP-908 disperses under high shear and requires a polar activator (30%~40%)  for best efficiency. Heat is not required to obtain good dispersion. Addition levels are typically in 0.2%~2.0%. Polar activator (95% Ethanol or 95% Methanol) is needed. Normally addition level of polar activator is recommended to be 30%~40% of CP-908 in weight.

Safety

All safety information is provided in the Material Safety Data Sheets for Zhejiang Camp-Shinning New Material Co.,Ltd.

Package

Kraft bag or kraft complex interior with PE or customized.

Storage

Rheology Modifiers Viscosifiers CP-908 has a shelf life of 2 years, and should be stored in ventilated cool and dry place.

Notice

The information on use is based on data which are believed reliable, but any recommendation or suggestion made are without guarantee or warranty, since the conditions of use are outside our control. All products are sold on the conditions that purchasers shall make their own tests to determine the suitability of such products for their purpose and that all risks are assumed by user. We disclaim any responsibility for damages resulting from careless or improper handling or use. Nothing herein is to be taken as permission, inducement or recommendation to practice any patented invention without a license.

Ask A Quote
Posted on

Rheology modifiers as a new style of organoclay rheological additive

Rheology modifiers

Rheology modifiers

Rheology modifiers CP-24  is a new style of organoclay rheological additive made from bentonite. Organoclay is used in solvent and resin systems covering medium polarity to high polarity range. Rheological additives is adapted for aromatic solvent, ester, ketone, alcohol and resins in medium and high polarity such as two-component polyurethane, fluorocarbon coating, epoxy coating, zinc-rich coating etc.

Rheology modifiers, which are divided into volumetric bentonite and water-based bentonite, which is what we often call inorganic water-based agent, it is a montmorillonite clay after strict purification and modification, it is a highly efficient Water-based inorganic gel and solvent-based gel, it is widely used in solvent-based systems and water-based systems to thicken suspension and control rheology.

This is a white or off-white powder. It is non-toxic and tasteless, relatively soft, and its mutation is particularly prominent. It has a relatively wide range of pH values. It is widely used in some different types of paints. At the same time, it is also widely used in some cosmetic lubricants. At present, the largest application field is in oil field drilling.

If you want to write specifically, it is mainly used as an anti-settling agent, latex stabilizer and rheological additive in water-based systems, and will be used in latex paint, real stone paint and some other types of crystals.

At present, our main packaging form is kraft paper bag or polyethylene woven bag. At the same time, we also use valve bag packaging and 50 packs. Finally, we will customize the packaging according to the needs of customers. Usually We recommend that you store it in a ventilated and dry place, which has a better meaning for its performance guarantee.

The following table is the parameters of our products for your reference, but here we would like to point out that in the bentonite of the water-based system, its bulk density is generally 0.6~0.8 grams per cubic meter.In the end, please use your experimental results as the standard.

Of course, we also have some types of organic bentonite, which are suitable for medicine, toothpaste, food and other industries. They are used as a sorbent in medicine, a binder for ointment flakes, a decomposer and stabilizer, and an additive for toothpaste.

Properties

Composition                      Organic derivative of a montmorillonite clay

Appearance                       Fine powder, light yellow

Moisture content (105℃,2hr)         ≤3.5%

Loss on ignition (1000℃)            (36.5±2.5)%

Bulk density                       0.40-0.60g/cm3

Fineness (<74μm, %)               ≥99

Dispersion fineness (μm)            ≤10

In some daily chemical products, Rheology modifiers is used as a suspending agent, thickener, and dispersant. Of course, in some dry mortar putty powder, there is also a large amount of water-based organic bentonite used.

In the use of putty powder, we must admit that Rheology modifiers most prominent characteristics are its strong water saturation and excellent lubrication. It can improve the effect of the official image and optimize the entire production formula, because our product has good viscosity, it can effectively reduce the addition ratio of other products, which is conducive to reducing the production cost of human capital.

Rheology modifiers  Advantages

  • High purity, low silica content. The Quartz content is less than0.5%.
  • Fine dispersion and particle size.
  • Good self-activated property.
  • Gel is very transparent and of light color.
  • Wide application range including low polarity to high polarity systems.
  • Polar activator can be eliminated.
  • High anti-settling and anti-sag performance.

Application of Organic bentonite clay

Rheology modifiers CP-24 is used in the following applications:

  • Paints including top grades paint, decorative paint, industrial

paint.anti-corrosion,container paint, marine paint and auto paint.

  • Printing
  • Sealants and adhesive.

Using

It can be added directly in powder under high shear condition. Addition level is commonly 0.1%~1.0% (7%-10% in greases) of total formulation by weight. in low and medium solvents, Polar activator is required to achieve better performance. The addition procedure is suggested as below.

  1. Add resin in solvent.
  2. Add CP-24 under slow agitation.
  3. Disperse under high speed for 10-15 minutes.
  4. Add polar activator (95% ethanol or 95% acetone)
  5. Disperse under high speed for 10-15 minutes.
  6. Add wetting agent and other additive.
  7. Grinding and next procedure.

If to make pre-gel, better efficiency can be achieved. Addition level in pre-gel is 8%-10% of total pre-gel in weight. Pre-gel procedure is as below.

  1. Add solvent or solvent mixture.
  2. Add CP-24  under slow agitation.
  3. Disperse under high speed for 5-10 minutes.
  4. Add polar activator.
  5. Disperse under high speed for 10-15 minutes.

Rheology modifiers Polar activator is suggested to be ethanol/water (95/5)or acetone/water (95/5). Dosage of polar activator is about 10%-35% of CP-24 by weight.

Note: The suggested addition level of our organoclay and polar activator is based on our lab testing. Exact dosage for detail formulation should be based on user’s testing.

Safety

All safety information is provided in the Material Safety Data Sheets for Zhejiang Camp-Shinning Co.,Ltd.. 

Package

Kraft bag or kraft complex interior with PE or customized

Storage

Rheology modifiers CP-24 has a shelf life of 2 years, and should be stored in ventilated cool and dry place.

Notice

The information on use is based on data which are believed reliable, but any recommendation or suggestion made is without guarantee or warranty, since the conditions of use are outside our control. All products are sold on the conditions that purchasers shall make their own tests to determine the suitability of such products for their purpose and that all risks are assumed by user.

We disclaim any responsibility for damages resulting from careless or improper handling or use. Nothing herein is to be taken as permission, inducement or recommendation to practice any patented invention without a license.

Pls mail us : [email protected]

We believe that you can find the organoclay rheology modifiers you need here, which will cater to the needs of your different application. We are also willing to provide you with the latest technology and guidance.

Looking forward to your inquiry about our rheology modifiers.

Ask A Quote