发布于

Water based organoclay rheological additive CP-EWB

Organo clay

Water based organoclay rheological additive CP-EWB

Water based organoclay rheological additive CP-EWB is water based inorgano clay rheological additive. It is mainly used in water based system.

Properties

Composition                       Inorganic modified montmorillonite clay

Appearance                       Fine powder, white

Moisture content (105℃,2hr)         ≤10%

Bulk density                       0.40~0.60g/cm3

Fineness (<74μm, %)               ≥98%

Advantages

  • High gelling effectiveness,
  • Easy dispersing
  • Prevents pigment setting
  • High thixotropy, good anti-sag property

Application

  • Industrial water reducible paint
  • Toothpaste and tooth polish
  • Cream and Lotions
  • Emulsion paint
  • Pigment and blung water
  • Paints including decorative paint, industrial paint
  • Grease
  • Inks
  • Oil drilling mud
  • Cleaning agent
  • Oil putty

Using

CP-EWB it can be added directly in powder, with its addition to be 0.2~3.0%. Procedures are as follow.

  1. water (PH:7.0-8.0)
  2. CP-EWB (Dispersing at high speed for 20-30minutes)
  3. Additive
  4. Pigment and filler (Mixing and dispersing)
  5. Emulsion (Mixing).
  6. Post correct.

Safety

All safety information is provided in the Material Safety Data Sheets for Zhejiang Camp-Shinning New Material Co.,Ltd..

Package

Kraft paper bag with PE liner or multi-wall paper sacks or customized. 25kg/bag or 22.68kg/bag or customized

Storage

CP-EWB has a shelf life of 2 years, and should be stored in ventilated cool and dry place.

 

Zhejiang Camp-Shinning New Material Co.Ltd

(TEL)  0086-13185071071

E-MAIL:  [email protected]

WEB:  www.rheologicaladditive.com

 

We are now looking for Global Distributors, Welcome to cooperate with us ! 

⇒ You are welcome to send us an email to know the latest information about organoclay. If you are interested, we will send you the latest catalogue, or free organoclays samples for testing.

 

E-MAIL:  [email protected]

WEB:  www.rheologicaladditive.com  

发布于

Modified Bentonite CP-10

Organo clay

Modified Bentonite

CP-10 is a kind of organo clay rheological additive. It is used in systems of non-polar to medium polarity aliphatic and other solvents (ketones, ester, ether esters, alcohols, aromatic).  

Modified Bentonite Properties

Composition                      Organic derivative of a montmorillonite clay

Appearance                       Fine powder,white

Moisture content (105℃,2hr)         ≤3.5%

Loss on ignition (1000℃)            30%-34%

Bulk density                       0.35~0.45g/cm3

Fineness (<74μm, %)               ≥98%

Dispersion fineness (μm)            ≤40

Advantages

  • High efficiency
  • The gel is of light colour and high clarity
  • Easy to use, no need to pregel
  • Eliminate polar activator
  • Consistent development of rheology
  • Can be used to post correct

Application

Modified Bentonite CP-10 is used in the following applications:

  • Paints
  • Sealants &adhesives
  • Inks
  • Cosmetic
  • Nano-composite

Using

Modified Bentonite CP-10 can be added directly in powder without polar activator and making pre-gel. But better performance may achieve if polar activator is added and pre-gel procedure is affected.

The addition is recommended to be before grinding procedure to get the best effectiveness. Addition level is commonly 0.2%~1.0%. 

Package

Kraft bag or kraft complex interior with PE or customized.

Storage

CP-10 has a shelf life of 2 years, and should be stored in ventilated cool and dry place.

发布于

organo clay modified bentonite CP-34

organo clay modified bentonite

Organo clay modified bentonite CP-34

CP-34 is an organo clay (modified bentonite), designed especially for use  in solvent based system. It can be used widely in solvents from low polarity to medium-high polarity.

Organoclays is mainly used in paints and coatings, oilfield drilling and fracturing fluids, grease adhesives, cosmetics and other fields. Organophilic clay is mainly used as a thickener, suspending agent, rheology additive, and thixotropic agent. It has outstanding performance in anti-settling and anti-sag properties.

Properties | Organo clay modified bentonite

Composition                      Organic derivative of a montmorillonite clay

Appearance                       Fine powder, light yellow

Moisture content (105℃,2hr)         ≤3.5%

Loss on ignition (1000℃)            28%-30%

Bulk density                       0.53g/cm3

Fineness (<74μm, %)               ≥98%

Advantages | Organo clay modified bentonite

High gelling efficiency

Light color gel

Produce reproducible thixotropic consistency over a wide temperature range

Imparts particle suspension, preventing hard settling of pigment and fillers.

Exerts strong film reinforcing action in organic binder systems.

Application

CP-34 is used in the following applications:

Marine paint, Industrial paint, heavy-duty, anticorrosion paint such as bituminous coatings, polyester paints, Alkyd paints.

Sealant

Inks

Grease

Unsaturated polyester putty

Using

CP-34 disperses under high shear and requires a polar activator for best efficiency. Heat is not required to obtain good dispersion. Addition levels are typically in 0.2%~2.0%. Polar activator (95% Ethanol or 95% Methanol) is needed. Normally addition level of polar activator is recommended to be 40%~50% of CP-34 in weight. If in xylene system, addition level of polar activator is about 30%-40% of CP-34 in weight.

Pre-gel is made as below procedure.

Charge solvent to mill

Slowly add CP-34(6-10% by weight of total pregel) to mill under agitation.

Mix at high speed for 5 minutes.

Add polar activator.

Mix at high speed for 5 minutes.

Package

Kraft paper bag with PE liner or multi-wall paper sacks or customized. 25kg/bag or 22.68kg/bag or customized

发布于

organo clay (modified montmorillonite)CP-27

organo clay (modified montmorillonite)

organo clay (modified montmorillonite)

organo clay (modified montmorillonite)CP-27 is an organo clay (modified montmorillonite), designed especially for use in solvent based system. It is used especially in solvents of high polarity.

Properties | organo clay (modified montmorillonite)

Composition                      Organic derivative of a montmorillonite clay

Appearance                       Fine powder, light yellow

Moisture content (105℃,2hr)         ≤3.5%

Loss on ignition (1000℃)            34.7%

Bulk density                       0.53g/cm3

Fineness (<74μm, %)               ≥98%

Advantages | organo clay (modified montmorillonite)

  • High gelling efficiency
  • Produce reproducible thixotropic consistency over a wide temperature range
  • Imparts particle suspension, preventing hard settling of pigment and fillers
  • Exerts strong film reinforcing action in organic binder systems

Application

CP-27 is used in the following applications:

  • Marine paint, Industrial paint, heavy-duty, anticorrosion paint (especially forepoxy paint)
  • Grease
  • Ink
  • Sealant
  • Unsaturated polyester putty

Using

CP-27 disperses under high shear and requires a polar activator for best efficiency. Heat is not required to obtain good dispersion. Addition levels are typically in 0.2%~2.0%. Normally addition level of polar activator (95% Ethanol or 95% Methanol) is recommended to be 45%~60% of CP-27 in weight.

Package

Kraft paper bag with PE liner or multi-wall paper sacks or customized. 25kg/bag or 22.68kg/bag or customized

We sincerely welcome you to inquire about our ORGANOCLAY products or request samples. Our samples are free and we provide you with a one-stop application solution.

You will need a lot of guidance and service during your use, and our technical department will provide you with a series of services.

The application of organic bentonite in oilfield drilling paints, coatings, inks, and lubricants has been widely welcomed and accepted in the market.

Looking forward to your inquiry.

发布于

organo clay rheological additive CP-EZ

Organo clay rheological additive

organo clay rheological additive CP-EZ

Organo clay rheological additive CP-EZ is a kind of organo clay rheological additive.Especially organoclays is recommended to be applied in medium polarity and high polarity system including aromatic and aliphatic solvent.

If you are producing paints, coatings, drilling fluids, inks, greases, sealants, and cosmetics, then our organic bentonite clay is undoubtedly your best choice for thickening rheology modifier.

Properties | organo clay rheological additive CP-EZ

Composition                      Organic derivative of a montmorillonite clay

Appearance                       Fine powder, light yellow

Moisture content (105℃,2hr)         ≤3.5%

Loss on ignition (1000℃)            35%-37%

Bulk density                       0.40~0.60g/cm3

Fineness (<74μm, %)               ≥99%

Dispersion fineness (μm)            ≤10

Advantages | organo clay rheological additive CP-EZ

  • Easy dispersing, fine particle size
  • High purity and low silica content
  • High viscosity and thixotropy
  • Eliminate polar activator in medium and high polarity solvent
  • Wide application range. It can be applied in almost all resins and solvents

Application

CP-EZ is used in the following applications:

  • Paints including decorative paint, industrial paint
  • Grease
  • Inks
  • Oil drilling mud
  • Cleaning agent
  • Oil putty

Using

CP-EZ can be added directly in powder under high shear condition. The addition is recommended to be before grinding procedure to get the best effectiveness. Addition level is commonly 0.2%~1.0%. In low polarity system such as mineral spirit, if polar activator is added, better efficiency can be achieved.

Dosage of polar activator is suggested to be 10%-20% of CP-EZ by weigh

 

 

发布于

organoclay (tetraallkyl ammonium bentonite) CP-250A

organo clay (modified montmorillonite)

Organoclay (tetraallkyl ammonium bentonite) CP-250A

Organoclay (tetraallkyl ammonium bentonite) CP-250A is a kind of purified and modified organoclay rheological additive, designed especially for use in Grease based on synthetic oils such as vegetable oil, polyester oil.

It has high gelling efficiency, fine thixotropy and perfect anti-settling.

what is bentonite grease
what is bentonite grease

Properties   | Organoclay tetraallkyl ammonium bentonite

Composition                      Organic derivative of a montmorillonite clay

Appearance                       Fine powder, light yellow

Moisture content (105℃,2hr)         ≤3.5%

Loss on ignition (1000℃)            34%-36%

Bulk density                       0.42g/cm3

Fineness (<74μm, %)               ≥98%

Advantages | Organoclay tetraallkyl ammonium bentonite

High efficiency

The gel is of light colour and high clarity

Easy to use, no need to pregel

Eliminate polar activator

Consistent development of rheology

Can be used to post correct

Application | Organoclay tetraallkyl ammonium bentonite

Bentonite grease CP-250A is used in the following applications:

Grease Lubricant(the base oil is synthetic oil such as middle-high viscosity petroleum, mineral oil, diester oil, polyester oil, vegetable oil etc.)

Wood coating 

Using of bentonite grease

When it is used in Grease Lubricant, polar activator is needed. Polar activator is acetone/water(95/5). The dosage of activator is 20%-30% of the weight of CP-250A. And also high shear can promote the dispersing of CP-250A.

Adding procedure as follows:

If condition permits, heat the base oil to 60~70℃

Add CP-250A while stirring, addition level is 7%-10% of the total formulation. Stir  5~10minutes

Add polar activator, addition level is 2%-3% of the total formulation. Then add other additives, stir 25~30minutes.

Use pump to help it pass colloid grinding and homogenizer.

Deair, filtrate, pack.Note: With High-speed dispersant of grinding machine, and properly prolong the dispersing time, better gelatin performance can be reached.

The Lubricanting grease which uses organoclay as thickener will own high dropping point, thus can be used under high temperature and presents good impermeability and water resistance.

Package | Organoclay tetraallkyl ammonium bentonite

Kraft paper bag with PE liner or multi-wall paper sacks or customized. 25kg/bag or 22.68kg/bag or customized

Storage

Bentonite grease has a shelf life of 2 years, and should be stored in ventilated cool and dry place.

Notice

The information on use is based on data which are believed reliable, but any recommendation or suggestion made are without guarantee or warranty, since the conditions of use are outside our control.

All bentonite grease | Organoclay tetraallkyl ammonium bentonite are sold on the conditions that purchasers shall make their own tests to determine the suitability of such products for their purpose and that all risks are assumed by user.

We disclaim any responsibility for damages resulting from careless or improper handling or use. Nothing herein is to be taken as permission, inducement or recommendation to practice any patented invention without a license.

[email protected]

Cell (Whatsapp):    +86-13185071071

what is bentonite grease, above info is a part of answer for this question.

Organoclay tetraallkyl ammonium bentonite