发布于

rheology modifier (rheological additive) CP-10A

organo clay (modified montmorillonite)

Rheology modifier (rheological additive) CP-10A is a kind of organo clay rheological additive. It is used in systems of non-polar to medium polarity aliphatic and other solvents (ketones, ester, ether esters, alcohols, aromatic)

Properties

Composition                      Organic derivative of a montmorillonite clay

Appearance                       Fine powder,white

Moisture content (105℃,2hr)         ≤3.5%

Loss on ignition (1000℃)            30%-34%

Bulk density                       0.35~0.45g/cm3

Fineness (<74μm, %)               ≥98%

Dispersion fineness (μm)            ≤40

Advantages

  • High efficiency
  • The gel is of light colour and high clarity
  • Easy to use, no need to pregel
  • Eliminate polar activator
  • Consistent development of rheology
  • Can be used to post correct

Application

CP-10A is used in the following applications:

  • Paints
  • Sealants &adhesives
  • Inks
  • Cosmetic
  • Nano-composite

Using

CP-10A can be added directly in powder without polar activator and making pre-gel. But better performance may achieve if polar activator is added and pre-gel procedure is affected.

The addition is recommended to be before grinding procedure to get the best effectiveness. Addition level is commonly 0.2%~1.0%.

发布于

Organic clay (Solvent based organoclay) CP-10

organo clay (modified montmorillonite)

Organic Clay | Your Best Organoclay Rheological Additive

Organic clay (Solvent based organoclay) CP-10 is a kind of organo clay rheological additive. It is used in systems of non-polar to medium polarity aliphatic and other solvents (ketones, ester, ether esters, alcohols, aromatic).

Properties

Composition                      Organic derivative of a montmorillonite clay

Appearance                       Fine powder,white

Moisture content (105℃,2hr)         ≤3.5%

Loss on ignition (1000℃)            30%-34%

Bulk density                       0.35~0.45g/cm3

Fineness (<74μm, %)               ≥98%

Dispersion fineness (μm)            ≤40

Advantages

  • High efficiency
  • The gel is of light colour and high clarity
  • Easy to use, no need to pregel
  • Eliminate polar activator
  • Consistent development of rheology
  • Can be used to post correct

Application

Organic clay CP-10 is used in the following applications:

  • Paints
  • Sealants &adhesives
  • Inks
  • Cosmetic
  • Nano-composite

Using

Organic clay CP-10 can be added directly in powder without polar activator and making pre-gel. But better performance may achieve if polar activator is added and pre-gel procedure is affected.

The addition is recommended to be before grinding procedure to get the best effectiveness. Addition level is commonly 0.2%~1.0%.

Package

Kraft bag or kraft complex interior with PE or customized

Organic clay

Organic Clay | Organic Clay Powder For Paints & Coatings

 If you are looking for a thickener for your grease production, ink production or paint production, then the new organic bentonite produced by Camp Shinning can undoubtedly solve your need for rheological properties.

It has very stable properties in application, especially its rheological properties and thixotropic properties.

Of course, in many applications, we recommend users to add a certain amount of activator to help fully reflect the dispersion and performance of organic bentonite in the whole formula.

The commonly used activators include methanol, ethanol propylene carbonate, and some customers use water as its activator, which also has good performance.

Generally, we recommend that the amount of organic bentonite added to grease or ink should be between 2% and 5%, and we recommend that you determine the amount of organic bentonite according to your own experimental results.

Our packaging is 25kg/bag, or 50lb/bag, which depends on the customer’s requirements. We will determine the amount of packaging.

Finally, most of our bags are made of white valve bags, which have moisture-proof function. Its shelf life is generally about two years. Of course, we recommend that you put them in a dry and ventilated place.

In order to ensure the perfect display of thixotropy, rheology and anti-settlement properties, we propose to place the goods in a dry and ventilated environment to ensure that all properties can be fully displayed.

Of course, there will be some slight differences in use according to different formulations. We recommend that you verify all of these through experiments.

Finally, we would like to inform you that if you encounter any questions when using organobentonite, or if your customers put forward any requirements in the market, you can boldly contact our sales department or technical research and development department.

We can provide product formula adjustment, and we will fully cooperate with your application needs according to your different application fields.

We mentioned above that the water content of our organic bentonite must be less than or equal to 3.5%, and the weight loss on ignition is also between 30 and 34%. Of course, its fineness is more than 98%. This kind of white powdery thickening rheological agent will be your most trusted choice of coating additive and suspending agent in the oil field.

Finally, we would like to say that our organic bentonite is widely sold in the global market, especially in Russia. For example, in the application of oil field drilling and pressure fluid, it is widely welcomed.

 

发布于

Rehological additive for solvent based paints coatings CP-MPB

Rehological additive for solvent based paints coatings CP-MPB

Rehological additive for solvent based paints  is widely used by solvent based paints factory.

Organoclay is a kind of organo clay rheological additive used in solvent paints and resin systems covering non polarity to high polarity range.

solvent based paints additive
solvent based paints additive

Properties | Rehological additive for solvent based paints

Composition                      Organic derivative of a montmorillonite clay

Appearance                       Fine powder, light yellow

Moisture content (105℃,2hr)         ≤3.5%

Loss on ignition (1000℃)            31%-34%

Bulk density                       0.40~0.60g/cm3

Fineness (<74μm, %)               ≥99%

Dispersion fineness (μm)            ≤10

Advantages  | Rehological additive for solvent based paints

  • High purity, low silica content
  • Fine dispersion and particle size
  • Wide application range
  • High viscosity and high thixotropy efficiency
  • Gel is very transparent and of light color

Application

Solvent based paints additive CP-MPB is used in the following applications:

  • Paints including top grades paint, decorative paint, industrial paint
  • Inks
  • Grease
  • Cosmetic
  • Cleaning agent

Using of solvent based paints additive

Rehological additive for solvent based paints CP-MPB can be added directly in powder under high shear condition. Addition level is commonly 0.1%~1.0% of total formulation by weight. Polar activator is required to achieve better performance.

Safety

All safety information is provided in the Material Safety Data Sheets for Zhejiang Camp-Shinning New Material Co.,Ltd..

Package

Kraft paper bag with PE liner or multi-wall paper sacks or customized. 25kg/bag or 22.68kg/bag or customized

Storage

CP-MP has a shelf life of 2 years, and should be stored in ventilated cool and dry place.

Notice

The information on use is based on data which are believed reliable, but any recommendation or suggestion made are without guarantee or warranty, since the conditions of use are outside our control.

All solvent based paints additive are sold on the conditions that purchasers shall make their own tests to determine the suitability of such products for their purpose and that all risks are assumed by user.

We disclaim any responsibility for damages resulting from careless or improper handling or use. Nothing herein is to be taken as permission, inducement or recommendation to practice any patented invention without a license.

 

EMAIL:     [email protected]

Cell (Whatsapp) :    +86-13185071071

发布于

Organoclay(organophilic clay) CP-MP

Organophilic bentonite CP-992

Organoclay(organophilic clay) CP-MP

Organoclay CP-MP10 is a kind of organo clay rheological additive. Organophilic clay is used in systems containing low, intermediate and high polarity solvents (ketones, ester, ether esters, alcohols, aromatic).

We also supply water based organoclay for water based paint,water based coatings.

Properties | Organoclay(organophilic clay)

Composition                      Organic derivative of a montmorillonite clay

Appearance                       Fine powder, light yellow

Moisture content (105℃,2hr)         ≤3.5%

Loss on ignition (1000℃)            42%

Bulk density                       0.35~0.45g/cm3

Fineness (<74μm, %)               ≥98%

Dispersion fineness (μm)            ≤40

Advantages | Organoclay(organophilic clay)

  • High efficiency
  • The gel is of light colour and high clarity
  • Easy to use, no need to pregel
  • Eliminate polar activator
  • Consistent development of rheology
  • Can be used to post correct

Application

CP-MP10 is used in the following applications:

  • Paints，Sealants and adhesive
  • Inks
  • Cosmetic
  • Nano-composit

Using

CP-MP10 can be added directly in powder. The addition is recommended to be before grinding procedure to get the best effectiveness. Pre-gel procedure and polar activator can be eliminated; but if add polar activator and have pre-gel procedure, better performance may be achieved. Addition level is commonly 0.2%~2.0%.

Package

Kraft paper bag with PE liner or multi-wall paper sacks or customized. 25kg/bag or 22.68kg/bag or customized

 

发布于

THICKENT W(HPMC)

organo clay (modified montmorillonite)

Organic modified clay THICKENT W(HPMC)

THICKENT W series is a special organic modified clay. It can be dispered both in aqueous system and solvent system. Especially, it has excellent behavior in water-borne system. It can replace cellulose such as HEC and HPMC in water-borne coatings, construction mortar, ceramics.

Typical Properties:

*Execllent water rentention (Superior water retention to HEC and HPMC).

*Wide viscosity range (Cover all viscosity range of cellulose).

*Fine temperature tolerance. It can disperse in cold water or in hot water.

*High adhesion and strengthening, it can be used as adhesive agent in printing and dyeing in textile industry.

*High thixotropy.

*THICKENT W has good coordination with cellulose, it can be used together with HEC or HPMC. Normally, the ratio of THICKENT W and cellulose is 80%:20%.

Specification:

Item Index Type Concent

ration(%)

 Viscosity(mPa.s25℃),RV7-60r/min
Appearance White powder  THICKENT W3

THICKENT W4

THICKENT W5

THICKENT W6

THICKENT W7

THICKENT W8

 2% 5500-9000
Particle size, 200mesh ≥95% 10000-18000
Moisture content ≤12% 20000-28000
Bulk density,kg/m3 430 30000-38000
45000-50000
PH(solution) 8.0~10.0 55000-65000

Application

  1. Cement-based mortar
  • THICKENT W has good thickening performance in mortar can improve mortar’s rheology. With THICKENT W, mortar is more slippy and easier for workers to coat on wall. It can prolong construction time of mortar, and create higher working efficiency. It is helpful for mortar to form high intension during solidification.
  1. Putty
  • THICKENT W has good water-retention performance in putty, and it can prolong construction time of putty and lift construction efficiency.THICKENT W has anti-skinning performance and is helpful for putty to have high intension during solidification.
  1. Thermal insulation mortar (mainly for Bonding mortar and overlay mortar)
  2. ◆  With its high water-retention, THICKENT W can prolong construction time of mortar and create higher working efficiency. It gives fine surface and slippery feeling of the mortar and improve surface quality by its shrinkability and anticracking. It is helpful for mortar to form high intension during solidification. And improve bond strength.
  3. Interface treatment binder

THICKENT W is good thickening agent for surface treatment binder. It can                  increase tensile strength and anti-shear strength, and make the binder to have better adhesion and binding strength.

Ceramic tile ◆ With its high thickening and thixotropy, it can be used to replace HEC in Emulsion coatings and other water-borne paint as rheological additive, film-forming agent, adhesive, emulsifier and stabilizer, it also can be used together with HEC in a proper ratio.

6    Emulsion coatings and other water-borne paint.

◆ THICKENT W can be used in ceramic tile as water retention agent, adhesive. With its perfect water retention and adhesion, ceramic tile can be strength enough to avoid crack and easier to be constructed.

7    Printing and dyeing in textile.

Package 

Kraft paper bag with PE liner.

The weight of each package is 20kg or 25kgesive

发布于

Water based organoclay CP-EWS

Water borne modified bentonite organoclay

Water borne modified bentonite organoclay CP-EWS

CP-EWS is modified bentonite. Water borne modified bentonite organoclay is used in water-borne system. Compared with CP-EW, CP-EWS has better performance of thixotropy, transparence and dispersion.

Another feature of water-based organic bentonite is that it has particularly good swelling properties. Its appearance is light white powder.

Properties | Water borne modified bentonite organoclay

Composition                       Inorganic modified montmorillonite clay

Appearance                       Fine powder, white

Moisture content (105℃,2hr)         ≤10%

Bulk density                       0.40~0.60g/cm3

Viscosity, 3% in water, mPa.S        ≥3000

Fineness (<74μm, %)               ≥98%

Water based bentonite is mainly used in water-based latex coatings. It can be used to replace the more expensive titanium dioxide.

From then on, it can mainly play a softening role in the purifiers used in clothing. At the same time, it is used in western tourism and some It has a filtering effect during the process of magazine formation and can be used as a filler in some industrial plastics. Organoclays is also a reinforcing agent for rubber and cables.

Advantages| Water borne modified bentonite organoclay

  • High gelling effectiveness, CP-EWS can form gel even at 2% in water
  • Easy dispersing.
  • Gel is transparency and of light color
  • Prevents pigment Settling
  • High thixotropy, Good anti-sag property

As an organic bentonite clay with high quality, suspending and thickening properties and economic benefits, it has good rheology and adsorption properties in water-based paints and paints. It has high viscosity, high whiteness, and good dispersion properties. Excellent, it can be compatible and compatible with most chemical qualities, ultimately achieving extremely strong rheological properties.

Application | Water borne modified bentonite organoclay

CP-EWS is used in the following applications:

Water-based spraying, we also call it inorganic gel. It is made of modified bentonite and is suitable for all water-based systems. The range of pH value is very wide and is particularly outstanding in terms of thermal stability.

Can be used in water-based paints, toothpastes, sauces, cosmetics and latex paints.

  • Industrial water reducible paint
  • Toothpaste and tooth polish
  • Cream and Lotions
  • Emulsion paint
  • Pigment and blung water
  • Water-born sealant, adhesive

Using | Water borne modified bentonite organoclay

Water-based organic bentonite can be used as pre-gel: first, disperse the water-based organic bentonite in a container at a ratio of dry powder:
water = 1:6, stir and add the powder at high speed to make a slurry (disperse at high speed for half an hour), and then use this slurry Dilute to dry powder: water = 1:9, that is, 10% solid content, continue stirring for 10 minutes, store until the pH value is stable before use.

Water based organoclay can be added at any stage of production, and adding it before dispersion and stirring can improve the wettability.

CP-EWS it can be added directly in powder, with its addition to be 0.2~3.0%. Procedures are as follow.

  1. water (PH:7.0-8.0)
  2. CP-EWS (Dispersing at high speed for 20-30minutes)
  3. Additive
  4. Pigment and filler (Mixing and dispersing)
  5. Emulsion (Mixing).

It is widely used in precision forging engineering, artesian flooring, ceramic glaze coatings, latex paints, water-based coatings and other fields.

Package

Kraft bag or kraft complex interior with PE or customized. 

Water borne modified bentonite organoclay

Inorganic gel, inorganic bentonite, and inorganic thickener are another names for our products.

If you are interesting,pls contact us.

We will provide you with free sample function testing, and will also email you the price and product instructions. Sincerely look forward to your consultation and you will get the products you need.

Mail:  [email protected]

Tel: 0086-131 85 071 071

Water borne modified bentonite organoclay