Looking for Global Distributorsย Organophilic Clay
As an manufacturer ofย Organoclay,we are now looking for Global Distributors for ourย OrganophilicClay, Welcome to cooperate with us !ย
Mail:ย [email protected]ย ย ย ย ย ย ย ย ย ย 86-13185071071
organo clay (modified montmorillonite), designed especially for use in paints,coatings,inks,lubricant grease and oil drilling mud.
ะพัะณะฐะฝะพะณะปะธะฝะฐย ย ย ะะพััะฐะฒัะธะบ ะพัะณะฐะฝะพะณะปะธะฝัย ย ย ย ะัะณะฐะฝะพัะธะปัะฝะฐั ะณะปะธะฝะฐ

Properties
Composition ย ย ย ย ย ย ย ย ย ย ย ย ย ย ย ย ย ย ย ย ย Organic derivative of a montmorillonite clay
Appearanceย ย ย ย ย ย ย ย ย ย ย ย ย ย ย ย Fine powder, white
Moisture content (105โ,2hr) ย ย ย ย ย ย ย ย โค3.5%
Loss on ignition (1000โ) ย ย ย ย ย ย ย ย ย ย ย 29%-32%
Bulk densityย ย ย ย ย ย ย ย ย ย ย ย ย ย ย ย 0.53g/cm3
Fineness (<74ฮผm, %)ย ย ย ย ย ย ย ย ย โฅ98%
Advantages
- Exerts gelling efficiency over a wide range of intermediate and low polarity
- Easy dispersing
- The gel is colourless and of high clarity
- Produce reproducible thixotropic consistency over a wide temperature range
- Imparts particle suspension, sag resistance without impairing flow and leveling, preventing hard settling of pigment and fillers
- Exerts strong film reinforcing action in organic binder systems
Application
Organoclayย is used in the following applications:
- Diesel Oils
- Coatings
- inks
- Paints
- Lubricant Grease
Using
Organoclayย disperses under high shear and requires a polar activator (30%~40%) ย for best efficiency. Heat is not required to obtain good dispersion. Addition levels are typically in 0.2%~2.0%. Polar activator (95% Ethanol or 95% Methanol) is needed. Normally addition level of polar activator is recommended to be 30%~40% of CP-180 in weight.
Send Enquiry
Order Online
Please send your message to us
*We will reply your inquiry to this Email as soon as we see it