en English
innerpagebg

Catalog Download

organo clay  | Organophilic Clay with high performance efficiency in diesel, low aromatic mineral oil

Organo clay  | Organophilic Clay is a specially designed organoclay exhibits high performance efficiency in diesel, low aromatic mineral oil, poly, linear and isomerized alpha olefins, and modified vegetable oil contained base fluid formulations as oil-based mud viscosifier. It is exhibits an excellent balance of dispersibility with initial viscosity build,efficiency and tolerance to adverse conditions for reduced depletion rates.

Organophilic Bentonite is highly effective in all-oil and invert emulsion drilling fluids, fracture and workover fluids.

TYPICAL PHYSICAL PROPERTIES
Appearance…………………………………………………………….yellow powder
Moisture%………………………………………………………………. ≤3.0
Bulk density(kg/cm³…………………………………………………≤450
Finess,-200sieve,%…………………………………………………≥95
Specific weight(g/cm³)……………………………………………..1.70

APPLICATIONS AND ADVANTAGES

The optimum concentration of  rheology modifier required is dependant on the oil/water ratio And density of the system as well as type and concentration of surfactants used as emulsifiers and wetting agents. Viscosity can be developed in:

—Oil Based Drilling Fluids
—Completion Fluids
—Invert Emulsion Drilling Fluids
—Workover Fluids
—Packer Fluids

Organic bentonite is used to increase viscosity and gel strengths in diesel or mineral oil base systems. Modified bentonite is an attractive alternative to conventional bentonite clay gallants that required higher shear and chemical activation for optimal dispersion and performance.

Modified bentonite can be added at the mud plant when building new mud, or can be added directly to the mud pits when building volume during the drilling process. Adequate agitation is necessary when incorporating organoclays into the oil based fluid. The amount of shear necessary will depend on the temperature of the synthetic oil, the rate of organoclay rheological additive addition, the oil/water ratio, and the amount of solids and/or weight material in the system.

USAGE
The recommended dosage is 1.0%-3.0% (10 to 30 kg/m3) of total circulation mud volume. Treatment concentration will vary depending on the type of mud system, solids content and oil-water ratio. While building the new mud system, slowly add rheological additive into base oil with effectively shearing and mixing by mixing pump, agitators and mud guns at the same time.

We note that a small amount of water (0.1-0.2% by weight of total formula) added to all-oil muds further speeds the gelation process and optimizes organoclay use. It should agitate well when mixing organic bentonite clay with the mud. Since it is an easy dispersing organoclay, less work will be required to incorporate it into the drilling fluid, and to build initial viscosity.

PACKAGE AND STORAGE
Organoclay is packaged in 25 ± 0.2Kg bags or 50lb, multi-wall, paper sacks. Store in a dry, well-ventilated area. Keep container closed. Follow safe warehousing practices regarding,palletizing, banding, shrink-wrapping and/or stacking.

If you are interesting our organoclay | organophilic clay in oil drilling mud (OBM), Pls mail us:   [email protected] 

Mob: 0086-131 85 071 071

//